User guide

18
SP31 MULTI-CHANNEL PROCESSOR USER GUIDE
USING MENUS
Configuring the on-screen display
You can choose to show information about the SP31
settings superimposed on the video image as an on-screen
display, and the SP31 provides a range of options to allow
you to configure the position, color, and duration of the
on-screen display.
To change the on-screen display
•Highlight DISPLAY SETTINGS in the SETUP
MENU. Then press the button on the front panel
or the SELECT button on the remote control to select
the required option.
Configuring the front panel display
The next two options on the DISPLAY SETTINGS
menu allow you to choose the brightness of the front
panel display, and the delay before the display dims in
DIM mode.
The following options are provided:
Option Description
DISPLAY BRIGHTNESS 1-3 to specify the brightness, or OFF to blank
the front panel display.
DISPLAY TIME Set to 1- 10 sec to determine how long the
display stays enlightend when it’s originally is
dimmed. NONE disables the display during the
dim mode.
The DISPLAY SETTINGS menu will be displayed:
The following options on the DISPLAY SETTINGS
menu determine the on-screen display:
Option Description
OSD TRANSPARENT Set to YES to allow the video image to show
through the background of the on-screen
display, or NO to blank the video image when
the on-screen display is displayed.
TV SYSTEM Specifies the TV system to ensure the correct
size and position of the on-screen displays.
Can be set to NTSC or PAL.
OSD POSITION Specifies the position of the operational
on-screen display as one of the options
TOP or BOTTOM.
OSD TIME Set to 1-10 sec to determine how long the
operational on-screen display stays on the
screen, or NONE to disable the display.
Configuring the remote control
The final option allows you to control the SP31 using an
external control system:
Option Description
REMOTE SELECT Set to FRONT to control the SP31 using an
infra-red remote control pointed at the front
panel, or REAR to control it via the IR-input at
the back panel.