User guide

SP31 MULTI-CHANNEL PROCESSOR USER GUIDE

SETTING UP THE SOURCES

The currently selected character is shown highlighted with

a block:

•Use the VOLUME control on the front panel or the

or buttons on the remote control to change the

currently selected character.

Each key press steps the character through the sequence:

space, upper-case letters, lower-case letters, digits, and

symbols.

•Press the button on the front panel or remote

control when you have finished entering the alias.

To add a new source

•Proceed as for editing a source, but select an unused

source as the starting point.

Examples of sources

The following examples show how to set up sources to

cater for more advanced applications.

Defining two sources that use the same input

Usually each source you define will correspond to a

different input on the back panel. However, there are

occasions when it is useful to be able to define two sources

using the same input, and the SP31 allows you to do this.

The following example shows how to define two sources,

with aliases MOVIE and MUSIC, designed for use with a

satellite receiver. Choosing the MOVIE source selects the

DOLBY PRO LOGIC II CINEMA surround mode,

which is ideal for movie soundtracks. Choosing the

MUSIC source, selects the STEREO mode for best

possible reproduction of pure music.

The definition of each of the two sources are shown in the

following screen displays: