User guide

2
SP31 MULTI-CHANNEL PROCESSOR USER GUIDE
INTRODUCTION
Using the SP31 with other
Primare products
Although the SP31 is flexible enough to optimise the
performance of virtually any other system component, it is
the perfect partner for other Primare products, including
the Primare Power Amplifiers and the new Primare
DVD30 DVD player. When using the SP31 with a
Primare DVD player, both units may be controlled from
the same RC keypad to provide the ultimate in control
and operational simplicity.
TECHNICAL SPECIFICATION
General
Analogue inputs 1 Balanced, 7 RCA
Digital inputs 1 Balanced, 5 RCA, 2 TOS-Link
Video inputs 4 Composite, 3 S-Video,
2 component
Balanced analogue
outputs Front (Left and Right)
Analogue outputs Front (Left and Right)
Center, Sub,
Surr (Left and Right)
Surr Back (Left and Right)
Analogue Record
Output 1 RCA (Left and Right)
Digital Output 1 TOS-Link and 1 RCA
Video Output 2 Composite and 2 S-Video,
1 component
Modes Bypass
Stereo
Dolby ProLogic II
Dolby ProLogic II Cinema
Dolby ProLogic II Music
Party
Dolby Digital
DTS
DTS ES 6.1,
DTS ES 6.1 discrete,
DTS NEO:6 Cinema,
DTS NEO:6 Music
External
“Primare Surround EX 7.1”
Video NTSC/PAL, Component, S-Video
and Composite
Other out-/inputs 1 IR input
1 Mic input
4 12V outputs (triggers)
1 RS232
1 DATA
Power consumption Stand by <38W
Analog data
Bandwidth 1 Hz-100 kHz – 1 dB
THD <0.005%, 20 Hz-20 kHz
Signal-to-noise -110 dB
Frequency response <10 Hz-100 kHz, 1 dB
Imput impedance 15 kΩ, unbalanced
Imput impedance 10 kΩ, balanced
Output impedance 50 Ω
Digital data
Frequency response 20 Hz-20 kHz ± 0,2 dB
THD+noise 0,005% @1 kHz
Dimensions (WxDxH) 430 x 385 x 100 mm
Weight 10 kg
All specifications may be subject to changes without further notice
Intuitive user interface
Primare has taken great care to develop an intuitive way of
controlling the SP31’s powerful range of features, designed
so that it will not distract you from the pleasure of
listening to music or watching movies through your
system. Features can be accessed using the SP31’s remote
control keypad or from the front panel controls.
Easy to set-up
The SP31 is also exceptionally easy to set-up for perfectly
balanced surround sound in any environment. The level of
each channel may automatically be calibrated by using a
microphone (not supplied) located at the listening
position. The built-in calibration test will then balance the
level of each output to give a correct sound image for your
system and listening room.