SP32 primare SP32 User guide
Important safety instructions Copyright © 2008 Primare Systems AB. All rights reserved. Primare Systems AB Renvägen 1 SE-352 45 Växjö Sweden http://www.primare.net Issue: SP32/1 The information in this guide is believed to be correct as of the date of publication. However, our policy is one of continuous development and so the information is subject to change without notice, and does not represent a commitment on the part of Primare Systems AB. Primare is a trademark of Primare Systems AB.
Welcome Welcome to the Primare SP32! Your SP32 is an advanced surround sound processor with the latest sound and video processing, making it the ultimate choice for home theatre.
Connecting the SP32 This page shows how to connect your SP32 to other equipment in your system.
Using the SP32 This page explains how to operate your SP32, with an explanation of the function of each of the front panel controls. Display P R I 3!#$ M A %84%2.
The first step allows you to change the balance of the main speakers: The SP32 allows you to vary the volume from 0 (silence) to 99 (maximum volume), where each step is equivalent to 0.5dB. 0.0dB To change the volume CENTER 0.0dB • SUBWOOFER 0.0dB SURROUND 0.0dB SURR BACK 0.0dB Rotate the VOLUME control on the front panel, or press the + or – buttons on the remote control.
Configuring the SP32 This page explains how to use the SP32 menus to configure the operation of your SP32. Using the menus Input settings HDMI settings Audio settings The MAIN MENU gives access to a series of menus which allow you to customize different aspects of the operation of the SP32 using the on-screen display.
Display settings Speaker settings Level settings • Use the < and > buttons on the remote control to adjust the distance or delay. In GENERAL mode you can adjust the distance between 0 and 20 feet (0 and 6m). Setting DISTANCE UNITS to MS shows the calculated delays and allows you to adjust them directly. Control settings Option Description TV SYSTEM Set to NTSC or PAL to specify the native system of your display.
Technical specification Digital audio Video Digital inputs. 10 bit digital video conversion system supporting NTSC/PAL, Component, S-Video and Composite, with OSD. 1 balanced, 3 RCA, 3 TOS-Link. Additional information Using a second zone Once you have configured the SP32 you can save the settings in a passwordprotected file, and then recall them at any time to restore the SP32 to your custom configuration. Digital output 1 RCA, 1 TOS-Link Frequency response 20Hz-20kHz+ 0.
Primare Systems AB :: Renvägen 1 :: SE-352 45 Växjö :: Sweden W W W . PRIMARE .