Instruction Manual

UP Global Sourcing UK Ltd. hereby declares that this product is in compliance with the
essential requirements and other provisions of directive 2014/53/EU.
The declaration of conformity may be consulted at UP Global Sourcing UK Ltd., Victoria
Street, Manchester OL9 0DD. UK or online at www.intempo.co.uk.
[3 MM CAPS] Care and Maintenance
Wipe the speaker with a soft, damp, lint-free cloth and allow to dry thoroughly.
Do not:
Use any abrasive cleaning solvents to clean the speaker, as this can cause damage.
Expose the speaker to extremely high or low temperatures
Drop the speaker
Attempt to disassemble the speaker
Getting Started
Remove the product from the box.
Remove any packaging from the product.
Place the packaging inside the box and either store or dispose of safely.
In the Box
Industrial Wireless Speaker
USB Charging Cable
Instruction Manual
Features
[TO MATCH AW]
Description of Parts
1. Industrial Wireless Speaker
2. Speaker
3. LED Indicator Light
4. On/ Off Switch
5. Play/ Pause Button (PLAY/PAUSE)
6. Mode Button (MODE)
7. Skip/Volume Button (+)
8. Skip/Volume Button (–)
9. TF/ Micro SD Card Slot
10. USB Port
11. 5 V 1 A DC Charging Port
12. USB Charging Cable
13. USB Connector
14. Micro USB Connector
Instructions for Use
Charging the Battery
The speaker is fitted with a 3.7 V 400 mAh battery (non-removable). It is recommended that
the battery is fully charged before first use; this will take approx. 2–3 hours. Connect the
micro USB end of the USB charging cable into the 5 V DC charging port on the speaker and
the USB end to a compatible USB port.