PDP TV Operating Manual Before connecting, operating or adjusting this product, please read the manual
Table of Contents Important Information....................................................................................................1 Important Safety Precautions..........................................................................................2 Preparations...................................................................................................................5 Using the Remote Control .......................................................................................
Table of Contents Setting Sound ............................................................................................................... 28 Using the Preset Audio Mode ................................................................................. 28 Customizing the Sound .......................................................................................... 28 Adjusting the Headphone Volume ..........................................................................
Important Information WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION-To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Important Safety Precautions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
Important Safety Precautions (continued) 12. Stand---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting inserious personal injuries as well as damage to the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the 13.
Important Safety Precautions (continued) 22. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system.
Preparations Using the Remote Control
Preparations (continued) Power connection Household power Plug into AC outlet. AC cord SPEAKER R CONTROL L DVI AUDIO COMPONENT INPUT 1 D-SUB PIC AUDIO PIC Y Cb /Pb Cr /Pr AUDIO COMPONENT INPUT 2 Y Cb /Pb Cr /Pr HEADPHONE AV OUTPUT AUDIO VIDEO L AUDIO R AV INPUT VIDEO RF SVHS AC- INPUT L AUDIO R 1. Connecting the female plug to the AC socket on the unit. 2. Connecting the male plug to the wall outlet as illustrated.
Preparations (continued) Antenna Connection CABLE TV (CATV) CONNECTION A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. Terminal. Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
Identification of Controls Main unit (front view) MENU SOURCE MENU VOL VOL CH CH REMOTE SENSOR POWER INDICATOR A blue indicator lights when the power is on and a red indicator lights when in the BOTTOM VIEW MENU VOL CH POWER ON/STANDBY CHANNEL DOWN/UP MENU VOLUME DOWN/UP 1. POWER Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY. 2. MENU Press this button to access the MENU main page. 3.
Identification of Controls (continued) Main unit (rear view) AC power input socket Speaker output jacks SPEAKER L R AC - INPUT CONTROL SPEAKER R CONTROL D-SUB D-SUB DVI AUDIO PIC AUDIO DVI AUDIO L COMPONENT INPUT 1 D-SUB PIC AUDIO PIC Y COMPONENT INPUT 1 PIC Y Cb /Pb Cr /Pr AUDIO Cb /Pb Cr /Pr COMPONENT INPUT 2 AUDIO Y Cb /Pb Cr /Pr AUDIO HEADPHONE AV INPUT AV OUTPUT VIDEO L AUDIO R VIDEO RF SVHS AC- INPUT L AUDIO R COMPONENT INPUT 2 Y Cb /Pb Cr /Pr HEADPHONE AUD
Identification of Controls (continued) Remote Control 10 1 2 - + 11 3 STILL ZOOM CLK SLP 4 5 12 13 6 7 14 15 8 9 16 Flip the cover, open in the direction of the 10 1. POWER Turn the unit on or off 2. CH5/6,VOL+/CH5/6---Use to switch channels; VOL+/----Use to adjust volume; In MENU operation, use CH5/6 to select menu item and VOL+/- to adjust selected item 3. MENU To access the MENU main page 4. STILL To freeze current picture 5. ZOOM To go into ZOOM or PAN mode 6. S.
Identification of Controls (continued) Remote Control - STILL 17 18 + ZOOM CLK MENU MODE 24 POS 19 20 21 22 23 SLP 25 SIZE SWAP PIP SPEAKER AUTO 17. MODE To access screen layout select menu 18. PIP display To activate picture in picture 19. POS To access PIP frame position select menu 20. SIZE To access PIP frame size adjusting menu 21. SPEAKER In multi-picture mode, press this button to output the sound of the selected picture frame from speaker 22.
Connections Cautions before connecting Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model. Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals. Refer to the user manual of the external device as well. When connecting an external device, turn the power off on the panel to avoid any issues.
Connections (continued) Connect a Camcorder CONTROL D-SUB D-SUB DVI AUDIO PIC AUDIO COMPONENT INPUT 1 PIC Y Cb /Pb Cr /Pr COMPONENT INPUT 2 AUDIO Y Cb /Pb Cr /Pr HEADPHONE AUDIO AV INPUT AV OUTPUT VIDEO L AUDIO R VIDEO RF SVHS L AUDIO R BOTTOM VIEW Y Y W R W R Yellow (VIDEO) White (AUDIO L) Red (AUDIO R ) Video cable Y VIDEO Audio cable W OUT IN R L AUDIO R How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder.
Connections (continued) Connect a DVD player CONTROL D-SUB D-SUB DVI AUDIO PIC AUDIO COMPONENT INPUT 1 PIC Y Cr /Pr Cb /Pb COMPONENT INPUT 2 AUDIO Y Cr /Pr Cb /Pb HEADPHONE AUDIO AV OUTPUT VIDEO L AUDIO R AV INPUT VIDEO RF SVHS L AUDIO R BOTTOM VIEW G W B R white (audio L) R red (audio R, Pr /C r ) Video cable G Green (Y) Audio cable B Blue (P b /Cb ) R B G R W DVD player COMPONENT AUDIO Pb L AUDIO R Pr Y AV OUT R AUDIO L VIDEO S - VIDEO Rear of the DVD player
Connections (continued) Connect a DTV receiver CONTROL D-SUB D-SUB DVI AUDIO PIC AUDIO COMPONENT INPUT 1 PIC Y Cr /Pr Cb /Pb COMPONENT INPUT 2 AUDIO Y Cr /Pr Cb /Pb HEADPHONE AUDIO AV OUTPUT VIDEO L AUDIO R AV INPUT VIDEO RF SVHS L AUDIO R BOTTOM VIEW G W B R white (audio L) R red (audio R, Pr /C r ) Video cable G Green (Y) Audio cable B Blue (P b /Cb ) R B G R W COMPONENT AUDIO Pb L AUDIO R Pr Y AV OUT R AUDIO L VIDEO S - VIDEO ANT DVI Rear of the DTV recei
Connections (continued) Connect a PC CONTROL D-SUB D-SUB DVI AUDIO PIC AUDIO COMPONENT INPUT 1 PIC Y Cb /Pb Cr /Pr AUDIO COMPONENT INPUT 2 Y Cb /Pb Cr /Pr HEADPHONE AUDIO AV OUTPUT VIDEO L AUDIO R AV INPUT VIDEO RF SVHS L AUDIO R BOTTOM VIEW or DVI cable VGA cable Audio cable How to connect: Connect a VGA (or DVI) cable between the VGA (or DVI) jack on the PC and the VGA (or DVI) input jack on the unit. To Watch the PC screen 1.
Connections (continued) Connect a VCR (for recording) or external amplifier CONTROL D-SUB D-SUB DVI AUDIO PIC AUDIO COMPONENT INPUT 1 PIC Y Cb /Pb Cr /Pr COMPONENT INPUT 2 Y AUDIO Cb /Pb Cr /Pr HEADPHONE AUDIO AV INPUT AV OUTPUT VIDEO L AUDIO R VIDEO RF SVHS L AUDIO R BOTTOM VIEW Y Y W R Audio cable R W R Yellow (VIDEO) White (AUDIO L) Red (AUDIO R ) Audio cable R W Video cable Y W VCR for recording To Audio inputs ANT OUT AV OUT R AUDIO L VIDEO S - VIDEO ANT IN AV I
Turning the Unit On and Off Turning the Unit On and Off Turning On Insert the power cord into the wall outlet. Press the Power button on the remote control. The unit will be turned on and you will be ready to use it's - + Turning Off With the power on, Press the Power control to turn off. Note: button on the remote Viewing the Menus and Displays picture Your PDP TV has a simple, easy-to-use menu system that appears on the screen. This system makes it convenient and fast to use features on the unit.
Memorizing the Channels Your PDP TV can memorize and store all of the available channels for both antenna and cable channels. After the available channels are memorized, use CH5/6to scan through the available stations.
Memorizing the Channels (continued) Setting Auto Fine Tune (AFT) 1 Repeat steps 1~4 in [Selecting the Signal Source] to search source antenna cable autoset
Basic Operations Changing Channels Using the Channel Buttons (CH5 or CH6) Press the CH5 or CH6 to change channels. When you press the CH5 or CH6, the unit changes channels in sequence. You will see all the channels that the unit has memorized. You will not see channels that were erased, not memorized or unavailable. Direct Accessing Channels Press the number buttons to go directly to a channel.
Basic Operations (continued) Select input source signal Using the SOURCE button 1 2 3 Press ENTER to confirm and the unit display signal from the selected input channel. source A D C1 C2 AV TV VGA A --------VGA, select signal from VGA (15-pin D-sub) terminals. D--------DVI, select signal from DVI terminals. C1 ------YPbPr1/YCbCr1, select signal from YPbPr1/YCbCr1 terminals. C2 ------YPbPr2/YCbCr2, select signal from YPbPr2/YCbCr2 terminals.
Setting Channel Options Editing Channel Label 1 options tv tuner content blocking 2 3 select to activate tuner menu 4 5 channel edit labels 6 7 select to edit channel labels 8 Use Use Use Use 5/6 to select character. 3/4 to move cursor left or right. SOURCE to clear label text if you wish to reset. MENU to return.
Setting Picture Customizing the Picture 1 picture If the picture menu does not display, press VOL+/brightness contrast sharpness color tint 2 3 4 50 50 50 50 12 down for picture settings for current window Using the Preset Picture Mode 1 2 3 There are three preset picture modes (Normal, Bright and Soft) and one user-set picture mode (User). Each preset mode has its own picture settings. Normal: Select for a normal picture. Bright: Select for a bright picture.
Setting System Setting the Menu Background 1 2 3 4 settings translucent menu background english language close caption mode cc1 close caption off on on mute opaque close capt.
Changing Screen Options Changing the Scaling mode of Image 1 window image size h position v position freeze window digital pan and zoom 2 3 4 The image size can be selected between: fill all, normal, wide and zoom . fill all 50 50 off on right/left to change image size Fill All The Fill All mode stretches the input vertically and horizontally to fill the display from edge to edge. This mode is the default mode.
Changing Screen Options (continued) Changing the Position of the Image The unit allows you to adjust the position of the image if it is not well-aligned.
Setting Sound Using the Preset Audio Mode 1 audio 2 Audio mode treble bass balance headphone MTS auto volume 3 4 Note: You can not access the treble and bass item unless the Audio Cinema 50 50 50 50 STEREO off on right/left to set audio mode Customizing the Sound 1 audio 2 Audio mode treble bass balance headphone MTS auto volume 3 4 User 50 50 50 50 STEREO off on right/left to adjust treble Using the S.
Setting Sound (continued) Choosing a Multi-Channel Sound (MTS) Soundtrack 1 audio Audio mode treble bass balance headphone MTS auto volume 2 3 4 Cinema 50 50 50 50 STEREO off on right/left to set stereo Choose STEREO for channels that are broadcasting in stereo. Choose MONO for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal.
Changing Screen Layout Selecting Screen Layout Using the Layout Menu 1 2 3 4 layout full screen pip split screen pop3 grid down for current screen layout options Using the MODE button 1 2 3 4 pip select to change layout menu to exit Full Screen When this item is selected, only main frame displays on the Main Frame 30
Changing Screen Layout (continued) PIP When this item is selected, one main frame and one PIP frame display on Main Frame PIP Frame Split Screen When this item is selected, the screen will be split into two Main Frame Split Frame POP3 2 When this item is selected, one main frame and three scanning frames display on the screen.
PIP Operations Viewing the Picture-in-Picture 1 layout full screen pip split screen pop3 grid 2 3 4 select activates pip window layout The screen displays one main frame and one PIP frame. 5 Press 5or6to select main frame or PIP frame. Main Frame The selected frame displays with a green border. Note: 4You can quickly open or close PIP frame by directly using the PIP displaying button. 4Many but not all adjustments and settings can be applied to the PIP picture when the PIP frame is selected.
PIP Operations (continued) Changing the Position of the PIP Frame 1 With the PIP frame displaying, press MENU to display the window menu main page. image size h position v position pip size pip position 2 3 4 fill all 50 50 12 right/left to adjust PIP position Main frame Using the POS button PIP frame 1 Press the POS button to quickly access the pip position select menu.
Adjustment in PC (VGA) Mode With working in VGA mode, this unit allows you to perform several adjustments.
Adjustment in PC (VGA) Mode (continued) Changing the Scaling mode of Image 1 window image size h position v position freeze window off digital pan and zoom 2 3 4 fill all 50 50 on right/left to change image size 5 Changing the Position of Image After connecting the unit to your PC, adjust the position of the screen if it is not well-aligned. 1 2 3 4 Press VOL+/- to adjust the value of the item until the screen is well-aligned.
Viewing Closed Captions The unit decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign language translations. All VCRs record the closed caption signal from television programs, so home-recorded video tapes can also provide closed captions. Most prerecorded commercial video tapes provide closed captions as well. Check for the closed Note: The Caption feature works in TV mode only.
Adjusting Parental Control Settings Parental Control This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching violent or sexual scenes that may be harmful. Restriction of TV programs includes two ratings that contain information about the program: the MPAA rating and the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and content.
Adjusting Parental Control Settings (continued) [2] TV Parental Guidelines Rating content based D L V S FV TV-Y (All children) TV-Y7 (Direct to Older Children) age TV-G (General Audience) based TV-PG (Parental Guidance Suggested) TV-14 (Parents Strongly Content Rating can be set but this Rating is not normally broadcast by TV Station. Content Rating can be set.
Adjusting Parental Control Settings (continued) Accessing the Parental Control Menu 1 options 2 tv tuner content blocking 3 4 select to activate content blocking menu 5 6 password Use VOL+/- to move password digit leftward or rightward. enter 000000 OK The default password is 000000, you may change the password yourself. 7 up/down change digit. right/left select digit The unit allows you to access the Parental Control menu if you input the right password, or you will be denied.
Adjusting Parental Control Settings (continued) Adjusting the Movie Rating 1 Movie blocking 2 3 4 select to adjust movie blocking level, menu to return 5 “PG-13” in the age-based rating is blocked, this will automatically block the higher ratings “R”, “NC-17”, “X” How to unblock a Movie Rating If you want to unblock a movie rating, please repeat steps 1~3 in [Adjusting the Movie Rating] and use Adjusting the TV Rating 1 2 3 4 Press tv blocking CH5/6or VOL+/- to select an age or content rating to be
Troubleshooting Before calling for repair service, check the following items for possible remedies to an Symptoms Check item “Ghost” or double images !This No power !Check No picture !Check Good picture but no sound !Increase the VOLUME. !Check that the unit is not muted. !Check Whether the sound is output may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may that the AC power cord is plugged into the mains socket.
Specifications Type Display Size diagonal Geographical Version Display Feature Resolution Pixel Pitch Maximum Colors Brightness Contrast PDP TV 42” Wide US 852 X 480 1.095 X 1.
Specification (continued) Terminals Video In Video Out Audio In Audio Out Accessories Other Standard Optional RF : TV/CATV 75ohms coaxial x 1 AV : RCA 75ohms composite video x 1 S-Video : 4-pin DIN x 1 D-Sub 15 x 1 DVI x 1 YPbPr/YCbCr (Support HDTV): RCA 75 ohms x 2 RCA 75 ohms L/R RCA for S-Video or AV x 1 Stereo mini phone Jack for PC x 1 Stereo mini phone Jack for DVI x 1 Stereo mini phone Jack for YPbPr/YCbCr x 2 L/R RCA for Video Out x 1 Headphone Jack : Stereo mini phone Jack x 1 Speaker Out
Dimensional Drawings 79 733 645 1050 110 287 1245 777 Design and specifications are subject to change without notice.
