User's Manual

Placing a call utilizing a System 2 Pro telephone handset
Note: If you want to add a System 2 Pro extension to the call, then
….press EXT button to activate the other System 2 Pro telephone(s).(Speaker light will flash on the
unit) activating the extension(s) to the call. This lets you know you activated the speakerphone
on the other System 2 Pro telephones.
Note: To use this feature it is important that the remotely activated telephone handset(s) are not
picked up)
. …to terminate the call press EXT button for 2 seconds to disconnect the other System 2 Pro
telephones from the call
(Beep will be heard and Speaker light will now be OFF)
Fast Page - utilizing the handset of a System 2 telephone handset:
Note: This is a convenience feature which allows paging for a few seconds instead of
screaming etc. This allows for immediate response because extensions are in hands-free
speakerphone mode.
….Pick up handset
…. press 1 on numeric keypad to break dial tone
.… press EXT button (Speaker light will flash) to activate the other System 2 Pro telephone(s)
speakerphones
…. .fast page the person(s) by speaking into handset for up to a few seconds
Note: To use this feature it is important that the remotely activated handsets are not picked up)
.…press EXT button for 2 seconds to disconnect extensions (Beep is heard and Speaker light
stops flashing)
….hang up handset
Fast page utilizing the System 2 Pro Speakerphone:
…press Speakerphone button
....press 1 on numeric keypad to break dial tone
....press EXT button (Speaker light flashes) to activate the other System 2 telephone(s)
speakerphones…
page the person(s) by speaking into handset for a few seconds
....to disconnect press EXT button for 2 seconds (Beep is heard Speaker light stops flashing)
….Press Speaker button to disconnect (Speaker light goes out)
Note: To use this feature it is important that the remotely activated handset(s) are not picked up)
Using your System 2 Pro telephones to get you Emergency Help.
Important: Before using this feature it is important that you follow all the directions in ClearVoice 50B,
100B and 200B User Manual section “Using the Emergency Features” on each of the System 2 Pro
telephone(s)
Note; To fully use the System 2 Pro Emergency Help System it is important that the Emergency message
and the Emergency #s to be called should be entered identically in each System 2 Pro telephone.
Activating the Telemergency Emergency Help System
…Press and hold down the Remote pendant button for 4 seconds until light flashes on the pendant (or
press (+) button on nearest System 2 phone for 4 seconds) to activate Emergency System until beeping is
heard. All System 2 Pro compatible code-selected System 2 Pro telephones will be activated.
USING THE MANY HANDS-FREE
SYSTEM 2 PRO
FEATURES
Speak/listen hands-free anywhere in your home
Wireless pendant can call for Emergency Help
and allow you to speak to called party(s)
Safety features by Telemergency™
Consumer Helpline 1-888-558-7420
Important: Please read individual User Manual forSystem 2 Pro telephones before proceeding