Confidential User Guide for Bluetooth Headset PHS-4 By Primax Electronics Ltd.
Confidential User Guide Change History Version 0.1 0.2 Date 16.05.2006 27.Jun.2006 Author River.Yang River.Yang Status Draft Draft 0.3 31.Jul.2006 River.Yang Draft 0.4 1.Aug.2006 River.Yang Draft Primax Electronics Ltd.
Confidential User Guide Table of Contents 1. INTRODUCTION ................................................................................................. 4 2. GETTING STARTED........................................................................................... 6 3. CHARGING THE BATTERY............................................................................... 6 4. PAIRING THE BLUETOOTH HEADSET WITH A COMPATIBLE PHONE ........ 6 5. DISCONNECTING THE BLUETOOTH HEADSET FROM THE PHONE.....
Confidential 1. User Guide Introduction Thanks for purchasing PHS-4.Your PHS-4 is a stylish headset that enables comfortable handsfree communication with compatible phone that supports Bluetooth technology. The PHS-4 contains the following parts, as shown in Figure 1. 1 - Power/Send/End key 5 - Charger connector 2 - Indication light 6 - Earpiece 3 - Volume up key 4 - Volume down key Figure 1 1.
Confidential User Guide • Reject incoming call 1.2 Indicator Light (2): • Power on –Blue light constant on for 1 seconds and beep once. • Pairing state –Blue/Red light flashing alternatively, the flashing continues for approximately 3 minutes or until the headset is connected to a compatible phone. If the headset can’t be connected to the phone during this time, the headset enter connectable status. • Connectable –Blue light flashing once every 5 seconds.
Confidential 2. User Guide Getting started Take out all components from the package. 1. PHS-4 Headset 2. Charger 3. User guide 4. Quick reference (optional) 3. Charging the battery Before using PHS-4, you must charge the product for approximately 2 hours. When the battery is fully charged, it provides up to 7 hours of talk time and up to 200 hours of standby time. 1. Connect the charger cable to PHS-4 2. Plug the AC adapter into a wall outlet. When PHS-4 is charging, red indicator light will display.
Confidential User Guide PHS-4 beeps once and an active Bluetooth connection is displayed by a blinking blue indicator light. If PHS-4 is turned on within 10 meters of several paired phones, the headset will try to connect to the last connected phone within 20 seconds. If the headset cannot connect to the last connected phone(for example, phone is turned off or it rejects the connection), it remains connectable until user action or Headset’s battery runs out.
Confidential User Guide 7. Powering Up To turn on PHS-4 Press and hold the power key for 2 seconds. PHS-4 beeps and the blue indicator light starts blinking. (First time use requires pressing it for 5 seconds.) To turn off PHS-4 Press and hold the power key for 2 second, PHS-4 beeps and the red indicator light is displayed briefly. 8. Making calls When PHS-4 is connected to the phone, make a call by using the phone in the normal way. Note that the call functions depend on the phone that you use. 9.
Confidential 13. User Guide Voice dialing When no call is in progress, press volume down key and hold it for 2 seconds until there is a tone that indicates that you can start saying the voice tag. The phone plays the voice tag and dials the related phone number. Note: This is a phone dependent feature. Please check out the manual of your phone about how to use that function. 14. Adjusting the earphone volume Press the volume up key to increase or the volume down key to decrease the volume. 15.
Confidential 17. User Guide Federal Communication Commission Interference Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
