User Manual

ManualsBrandsPrimax Electronics ManualsAudio EquipmentBluetooth Wireless Stereo Headset

General Information

Thank you for purchasing PSH-1A Wireless Stereo Headset. Your new device is a stylish

product that enables you to communicate comfortably with compatible mobile phones that

support Bluetooth wireless technology.

WARNING:

Using a mobile phone while driving can distract you and may cause accidents.

Driving with both ears covered may violate Traffic Regulations in certain countries.

Please consult your local authorities.

Getting started

What’s included

(1) Headset (2) User Guide (3) Power adaptor** (4) USB cable**

** depends on customer require

Overview of the headset

(1) Indicator Light

Status indication with blue and red lights

(2) Volume Down button

Decreases the volume

(3) Volume Up button

Increases the volume

(4) Multifunction button

Power on/off, play/pause, answer/end a call

(5) Forward button

Forward to next song

(6) Backward button

Go back to the previous song

(7) Charger connector

Summary of content (6 pages)

PAGE 1
General Information Thank you for purchasing PSH-1A Wireless Stereo Headset. Your new device is a stylish product that enables you to communicate comfortably with compatible mobile phones that support Bluetooth wireless technology. WARNING: Using a mobile phone while driving can distract you and may cause accidents. Driving with both ears covered may violate Traffic Regulations in certain countries. Please consult your local authorities.
PAGE 2
Charge the headset Before using the headset for the first time, you must charge it for approximately 3.5 hours. When the battery is fully charged, it provides up to 12 hours of talk time, 10 hours of music playing time and up to 350 hours of standby time. Always use the charger provided in the sales package. 1. Connect the charger cable to the headset. 2. Plug the charger into a wall socket. The lights turn to solid red in charging status. 3. When the battery is fully charged, the red light will turn off.
PAGE 3
Connecting with two devices simultaneously It is possible to connect the PSH-1A to two devices at the same time, so that you can listen to the music and keep phone connectivity at the same time. To do so, please pair with cellular phone first and keep connecting profiles on both ends. Make the cellular phone’s Bluetooth service disconnected from the headset. Then, pair the PSH-1A with MP3 player or computer. After this completed, let the cellular phone ‘find’ the headset again.
PAGE 4
Jump to next track Press the Forward button to forward to the next song. Jump to previous track Press the Backward button to backward to the previous song. Fast forward * Press and hold Forward button to perform fast forward. Rewind * Press and hold the Backward button to perform rewind. * Fast forward and rewind functions might be unavailable on some cellular phones. Those features are phone dependant.
PAGE 5
What the sound means (30 sec) Power on / off Long high tone beep Pairing mode Short low tone beeps Connection lost / fail Long low tone beep Connection established Short high tone beep Sound volume over range Descending low tones (too loud or reaching mute) Incoming call 7 ascending tones Battery low Long low tone, repeat every 30 seconds What the light means (all on the right earpiece) Turning on Power on however not engaged Power on and engaged Pairing mode Battery low Turning off Flashing blue light
PAGE 6
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.