User Manual

1. Multifunction key
For battery charging.
Relays the caller's voice.
Picks up your voice input.
3. Charger connector
4. Earpiece
5
. Microphone
Getting started
Charging the battery
Pairing the Bluetooth headset to a
Bluetooth mobile phone
Switches the headset on and off
Answer incoming calls
End active calls
Reject incoming calls
6
. Volume up / down buttons
2. Indicator light
Introduction
Thanks for purchasing PHS-9 Bluetooth Headset. Your Bluetooth Headset is
a stylish headset that enables comfortable handsfree communication with
compatible phone that supports Bluetooth technology.
Functions & Controls
Remove all components from the package...
Bluetooth Headset (with 15 mm diameter earbud)
AC Battery Charger
User Guide
Before using the Bluetooth Headset, you need to charge the built-in
rechargeable battery for approximately 2 hours. The indicator light is
red while charging. When the battery is fully charged, it provides up to 6
hours talking time and up to 150 hours standby time.
1. Connect the AC battery charger cable’s Micro USB connector to PHS-9
Headset’s Micro USB socket.
2. Plug the charger’s AC plug to AC outlet. When charging, the Bluetooth
Headset’s status indicator lights in solid red.
3. When the battery is fully charged, the status indicator turns to green.
Unplug the charger cable from AC outlet and Bluetooth Headset.
To enter pairing mode manually...
1. The headset must be in off mode.
2. Press the multifunction button for at least 5 seconds. Green LED light
flashing rapidly, and 4 ascending tones can be heard. Your mobile
phone can now "look for" the headset.
3. Activate the Bluetooth connection with the mobile phone according to
the mobile phone’s user’s guide.
4. Set the mobile phone to search for the Bluetooth devices according to
the mobile phone’s user’s guide.
5. Select the Bluetooth Headset from the phone menu.
6. Enter the pin code 0000 to connect (or “pair”) Bluetooth Headset to the
phone. You will hear two high tones when pairing completed.
7. Select ‘PHS-9’ from the device list on your phone. The LED will light
blink once every 5 seconds with the headset connected to your phone.
If the headset is turned on within 10 meters from several paired phones,
the headset will try to connect to the last connected device. If the headset
does not connect to the last connected phone, green LED will be flashing
every 2.5 seconds indicating it is in power on however not engaged status.
If the headset is turned on but not connected established, or dropped off
from previous connection, it will stay in connectable status for 30 minutes
before automatically turn off.
Phone list can be erased by holding the multifunction button and volume +
key simultaneously for more than 5 seconds
Pairing is the process for linking the headset with your Bluetooth enabled
mobile phone. After this process is completed, you can use the Bluetooth
Headset with the paired mobile phone. The Bluetooth Headset can be
paired with up to 8 compatible phones but connected to only one phone
at a time. If the headset is turned on with no existing pairing information
stored (e.g., first time use or pairing information been erased), it will enter
pairing mode automatically.
5
4
3
1
2
6