Bluetooth Keyboard Mouse Set User Manual
Bluetooth Keyboard Mouse Set About this manual Thank you for your purchase of this Bluetooth keyboard mouse set. This topics covered in this manual are listed as following.
Bluetooth Keyboard Mouse Set Contents Introduction ................................................ 1 Package List .....................................................................1 Features ...........................................................................2 Installing the Batteries ................................... 3 Keyboard .......................................................................... 3 Optical Mouse ..................................................................
Bluetooth Keyboard Mouse Set 1 Introduction 1.1 Package List Before you start using the set, check the following contents in your package. If anything is missing, contact your retailer. WWW Esc F9 F1 F10 F2 F11 F3 F12 F4 F5 F6 F7 F8 Insert Delete Home End Pause Scroll Print Break Screen )( Lock _ / + _ !~ $ * Num Lock & 1 9 ` * % ^ @ # 2 0 3 4 - 5 = 6 7 8 Tab Q O W P E { R T } Y U I + 7 8 9 | ][ Home PgUp \ Caps Lock A K S L D F G H J Enter
Bluetooth Keyboard Mouse Set 1.2 Features Keyboard Features • 103-key design • Power saving mode (after idling for ten minutes) • Internet and multimedia hotkeys Optical Mouse Features • With scroll wheel and two buttons • Power saving mode • LED indicator a. Red: dead battery b. Flashing red and green: mouse/keyboard pairing USB Bluetooth Dongle Features • Bluetooth specification v1.2 and v2.
Bluetooth Keyboard Mouse Set 2 Installing the Batteries The keyboard and mouse both need two AA size batteries. Follow the steps below to install the batteries. 2.1 Keyboard 1. Remove the battery cover as shown. 2. Install two "AA" batteries while observing the polarity (+ and -) marks indicated inside the compartment. 3. Replace the battery cover.
Bluetooth Keyboard Mouse Set 2.2 Optical Mouse 1. 2. 3. Press the button and the battery cover pops out. Install two "AA" batteries while observing the polarity (+ and -) indicated inside the mouse. Replace the battery cover.
Bluetooth Keyboard Mouse Set 3 Installing and Uninstalling the WIDCOMM Bluetooth Stack 3.1 Installing the WIDCOMM Bluetooth Stack Before installing the WIDCOMM Bluetooth stack, plug the USb Bluetooth dongle into a USB port of your computer. 1. Insert the provided Installation CD in the CD ROM drive. 2. The installation stack loads automatically. If not, click the Setup.exe in the bin folder of the CD ROM. 3. The welcome screen introduces you to the installation process. Click Next to continue.
Bluetooth Keyboard Mouse Set 6 4. Read the agreement and select “I accept he terms in the license agreement”. Click Next to continue. 5. The program will be installed in the folder as shown. Click Change to install in a different location. Click Next to continue.
Bluetooth Keyboard Mouse Set 6. Click Install to start the installation. The installation may need some time to complete. 7. The following screen appears to indicate the installation is complete. 8. Remove the dongle and plug it back in, the keyboard and mouse will pair automatically. Click Finish to exit the installation.
Bluetooth Keyboard Mouse Set The following prompt requires you to restart the computer so that the Bluetooth stack takes effect. Click Yes to restart your computer now or No to restart later. 3.2 Uninstalling the WIDCOMM Bluetooth Stack Follow the steps below to uninstall the WIDCOMM Bluetooth stack from your computer. 8 1. Remove the USB Bluetooth dongle. 2. Click Start > Settings > Control Panel > Add/Remove Programs. 3. Select WIDCOMM Bluetooth Software from the program list and click Remove. 4.
Bluetooth Keyboard Mouse Set 4 Setting up the Keyboard and Optical Mouse 4.1 Automatic Pairing in Boot Mode Follow the steps below to enable the keyboard and mouse in boot mode. 2 1 1. Plug the USB Bluetooth dongle into one of USB ports before starting your computer. 2. Power on the mouse. (The power switch is on the bottom of the mouse.) 3. The Bluetooth connection is established. Turn on the computer and use the keyboard to enter the BIOS setup. 4.
Bluetooth Keyboard Mouse Set Enabling the function of USB keyboard/mouse in BIOS If the keyboard and mouse failed to work (refer to “7 Troubleshooting” on page 19 for more probable conditions), check that the USB function of the keyboard/mouse has been enabled in the BIOS setup. 1. Before turning on your computer, make sure the bluetooth connection has been established. 2. Turn on your computer and follow the on-screen instructions to enter the BIOS setup. 3.
Bluetooth Keyboard Mouse Set For the keyboard, use the tip of an unfolded paper clip (or similar object without a sharp tip), to gently press the connect button inside the hole on the back of the keyboard for two seconds. Connect button Connect 3. Press the button on the bottom of the USB Bluetooth dongle until the LED begins to flash once every second. This indicates the Bluetooth dongle has started to search for device to be paired.
Bluetooth Keyboard Mouse Set 4.3 Pairing on WIDCOMM Bluetooth Stack Before using the Bluetooth stack for keyboard and mouse pairing, install the stack as instructed in “3 Installing and Uninstalling the WIDCOMM Bluetooth Stack” on page 5. Then follow the steps below. To start the Bluetooth stack for the first time, see “6 Using the Stack for the First Time” on page 17 for more information. 12 1. Press the USB Bluetooth dongle button until the following Human Interface Device (HID) screen appears. 2.
Bluetooth Keyboard Mouse Set 3. When the keyboard is connected, the following screen appears. Use the paired keyboard to type the digits shown on the screen and press the Enter key. The keyboard is then connected. The Bluetooth security code changes each time the keyboard is connected.
Bluetooth Keyboard Mouse Set 5 Using the Keyboard and Optical Mouse 5.1 Using the Keyboard The keyboard features 103 keys. Besides the standard keys, this keyboard has a row of hotkeys. The functions are described as below. 1 2 3 4 5 6 7 8 WWW Esc F9 F1 F10 F2 F11 F3 F12 F4 F5 F6 F7 F8 Insert Delete Home End Print Pause Break Scroll Lock Screen !~ @ # * % ^ / $ _ * & )( _ ` 2 No 1 3 Num Lock + Home 4 Icon WWW 2 5 6 7 Function 8 Internet E-mail 9 \ PgUp
Bluetooth Keyboard Mouse Set • Buttons 5, 6, 7, and 8 are multimedia hotkeys. These allow for easy operation when playing media files. • The hotkeys are disabled when the keyboard is pairing automatically in both boot mode and Windows mode. • The keyboard will enter the power saving mode after ten minutes idle time. 5.
Bluetooth Keyboard Mouse Set To view more detailed information on the mouse battery status, go to the Control panel > Mouse > Bluetooth. There is no battery LED on the keyboard. To check its power status, go to the Control panel > Keyboard > Bluetooth.
Bluetooth Keyboard Mouse Set 6 Use of the WIDCOMM Bluetooth Stack 6.1 Using the Stack for the First Time To start using the Bluetooth Stack, double click the Bluetooth icon in the system tray. 1. The Initial Bluetooth Configuration Wizard will launch. Follow the instructions on screen to complete the configuration. 2. When the Bluetooth Configuration is complete, the following HID screen appears and starts to search for Bluetooth devices. 3. Click on the HID device you want to connect with.
Bluetooth Keyboard Mouse Set About the Bluetooth icon The Bluetooth icon acts as an indicator for dongle status. 1. A red icon indicates there is no dongle inserted. 2. A white icon indicates the dongle is plugged in. 3. A green icon indicates the dongle has detected the HID devices. 6.2 Connecting to the other HID Devices Besides the mouse and keyboard, the Bluetooth Stack also allows you to connect to other Bluetooth devices. 18 1.
Bluetooth Keyboard Mouse Set 7 Troubleshooting If you have any problems with your Bluetooth keyboard or mouse, please check the following: • Check the system requirements to make sure that your system is compatible. • Check to see if the batteries in the keyboard and mouse are installed correctly. Make sure the polarity of the batteries corresponds with the polarity signs inside the keyboard and mouse battery compartments. • When the mouse LED is lit red, it indicates battery power low.
Bluetooth Keyboard Mouse Set 8 FCC/ Industry Canada Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits If you have any problems with your Bluetooth keyboard or interference mouse, are designed to provide reasonable protection against harmful please check the following: in a residential installation.