User Manual

Bluetooth Keyboard Mouse Set
Enabling the function of USB keyboard/mouse in BIOS
If the keyboard and mouse failed to work (refer to “7 Troubleshoot-
ing”
on page 19 for more probable conditions), check that the USB
function
of the keyboard/mouse has been enabled in the BIOS setup.
1. Before turning on your computer, make sure the bluetooth
connection has been
established.
2. Turn on your computer and follow the on-screen instructions to
enter the
BIOS setup.
3. Use the cursor keys on the keyboard to navigate through the
menu items and enable
the USB function for USB keyboard and
mouse. (In some BIOS settings,
you can use the Bluetooth mouse
to navigate through the items.)
Some old PC systems do not support the USB keyboard/mouse in
BIOS/DOS environment.
4.2 Quick Pairing in Windows
The Bluetooth keyboard and mouse has been set to a pre-pairing
mode
as the factory default. For quick pairing, enable the pre-pairing
mode following
the steps below.
1. Plug the USB Bluetooth dongle into a USB port of your computer.
The first time you connect the keyboard or mouse to your
computer, the
Found New Hardware Wizard will automatically
launch.
Cancel the Wizard and follow the steps below.
2. For the mouse, press the pairing button at its bottom.
Pairing
button
10