HP 2.
HP 2.4G Wireless Mouse USRE MANUAL MORFDIUO and MORFDIUO-D User’s Quick Guide This guide will take you through all the functions of the mouse and explain how to configure them using the mouse. Introduction Congratulations on your purchase of the HP 2.4G Wireless Mouse. This mouse is the latest in a wide range of computer peripherals manufactured by HP and is designed to provide you with the highest level of comfort available while also allowing for maximum functionality.
HP 2.4G Wireless Mouse USRE MANUAL MORFDIUO and MORFDIUO-D The Middle Mouse Button By default, the mouse wheel is set to operate as Middle Button when pressed. Select the function you wish to assign to the middle button by checking the radio buttons in the Select Task list. Click to save all changes. Move your mouse over and click any of the Select Task list options for more detailed information. Side Button 1 By default, the button is set to operate as Backward when pressed.
HP 2.4G Wireless Mouse USRE MANUAL MORFDIUO and MORFDIUO-D Others Select to execute one of a set of other pre-defined functions when you press the button. A drop down menu will appear. Select an application from the following list: Click to save all changes. Change Wheel Settings You can configure the wheel settings in the wheel settings screen. The 'Scrolling Speed' section allows you to adjust the scroll speed when you scroll the wheel vertically.
HP 2.4G Wireless Mouse USRE MANUAL MORFDIUO and MORFDIUO-D Horizontal Scrolling Move the slider to the left/right to decrease/increase the horizontal scrolling speed. Click to save all changes. Double-Click Speed Move the slider to set the pointer movement speed. Move the point in the Test Area to test your new setting. Test Area Click to save all changes.
HP 2.4G Wireless Mouse USRE MANUAL MORFDIUO and MORFDIUO-D Slow Motion Check to enable the slow motion function by pressing the Shift key. Click to save all changes.Pointer Wrap Check to enable the "go through" function. Click to save all changes. Show icon in the system tray Click to display the icon in the system tray when the Mouse Suite software is running.
HP 2.4G Wireless Mouse USRE MANUAL MORFDIUO and MORFDIUO-D Troubleshooting Question: My mouse is not working. What should I do? Answer: Check if the receiver is plugged in correctly to your computer's USB port. A loose connection may result in the computer not being able to detect the device. If your mouse is connected to a hub or multi-port USB connector, unplug the device and plug it directly into your computer's USB port, ensuring there is no interference caused by these devices.
HP 2.4G Wireless Mouse USRE MANUAL MORFDIUO and MORFDIUO-D Low Battery Notification When the mouse is running out of power, a Notification window will pop up on the screen. Replace the batteries to continue to use the mouse. Battery Notice: • Press any button to wake up the mouse while the mouse is in the standby mode. • CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
HP 2.4G Wireless Mouse USRE MANUAL MORFDIUO and MORFDIUO-D FCC Statement Federal Communications Commission (FCC) requirements, Part 15. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HP 2.4G Wireless Mouse USRE MANUAL MORFDIUO and MORFDIUO-D CE Statement CE Declaration Of Conformity Hereby, the manufacturer, declares that this s Mouse Wireless Presenter in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Essential requirements -- Article 3 Protection requirements for health and safety - Article 3.1a --Testing for electric safety according to EN 60950 has been conducted. These are considered relevant and sufficient.
HP 2.4G Wireless Mouse USRE MANUAL MORFDIUO and MORFDIUO-D Contents of the Package: l HP 2.4G Wireless Mouse l HP 2.4G Dongle l Two AA Battery l User’s Quick Guide Install Hardware: l Push the release button to open the battery door l Close the battery door l Connect the Dongle to the computer. l Switch on the power switch on the back.
