User's Manual

E-Dice Using Guide
Notice:
z The using age of the E-Dice is over 14 years old.
Pairing the E-Dice
The E-Dice is paired for your convenience before out of factory. It should work immediately after plugging the dongle
into yourcomputer.
You may need to manually pair the E-Dice if it is not functioning.
To pair the E-Dice, do the following:
1. Plug the dongle into USB connector of your computer.
2. Open the software program, then click E-Dice Testingbutton in the pop-up dialog box, then click Start Pairing
button and rollthe E-Dice, when the E-Dice is stopped, the dialog interface will show the same pips with the
E-Dice, then click Complete Pairing ->Backbutton to finish the pairing process.
Note: You need to do the same pairing process when you get a second E-Dice before playing games.
Charging the battery for E-Dice
The E-Dice has an internal rechargeable battery. The battery indicator is on the SIXpips side of the E-Dice.
When you roll the dice, the indicator light blinking indicates low on power.
To charge the battery, do the following:
Put the dice into the included USB power adapter and connect the adapter to computer USB connector.
Note: When the dice is charging, the indicator blink. When charging completed, the indicator light will be not bright.
Using and Maintenance
The effective range between E-Dice and computer is 10 meters. Find a comfortable posture when rolling the dice.
Keep the E-Dice away from water or wet environment. Clean the dice with a soft and dry cloth.