User's Manual

ENGLISH
Knowing your mouse
Installing the battery
Connecting to PC
Installing the tilt wheel driver
WX470 Laser Mouse
Your package includes:
a. ASUS WX470 Laser Mouse
b. Nano USB 2.4 GHz receiver
c. 3 x AAA batteries
d. Quick Start Guide
Mouse dimension (mm): 105(L)x66(w)x37(H)
Mouse weight: 82g (without battery)
Resolution: 1100/1600dpi
a
b
c
d
Quick Start Guide
1. Remove the USB receiver from the USB compartment and then turn the power switch to
1100dpi for normal use or to 1600dpi for better performance.
2. Insert the USB receiver into your computer's USB port.
NOTES:
• You can store the USB receiver inside the mouse.
• To save power, turn off the power when you are not using the mouse.
2
1
OFF
1600
1100
USB dongle compartment
Off
1100dpi
1600dpi
T-CHINESE S-CHINESE FRENCH GERMAN ITALIAN SPANISH JAPANESE RUSSIAN
1
2
3
1. Back and Forward buttons
2. • Tilt wheel (4-Way Scrolling, driver installation required)
• DPI and battery indicator
3. Aero Flip 3D button
Use this button to instantly switch between tabs in
Windows® 7.
NOTE: This mouse can work on almost any surface, even on
4mm or thicker clean glass.
1. Remove the cover from under the notch as shown.
2. Insert up to three batteries into the slots, taking note of the
correct polarity.
3. Press the cover in the direction of the arrows to replace it.
3
1
2
CAUTION:
• The bundled batteries are not chargeable.
• If you do not use the mouse for a long time, remove the batteries.
• Use new or similar-type batteries.
Go to ASUS website at www.asus.com to download the latest driver for the 4-Way Scrolling
tilt wheel and install it to use the 4-Way Scrolling feature.
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the
user’s authority to operate the equipment.
Knowing your mouse
Installing the battery
Connecting to PC
Installing the tilt wheel
driver
Your package includes:
a. ASUS WX470 Laser Mouse /
b. Nano USB 2.4 GHz receiver /
c. 3 x AAA batteries / d. Quick
Start Guide
Mouse dimension (mm):
105(L)x66(w)x37(H)
Mouse weight: 82g (without
battery)
Resolution: 1100/1600dpi
1. Remove the cover from
under the notch as shown.
2. Insert up to three batteries
into the slots, taking note of
the correct polarity.
3. Press the cover in the
direction of the arrows to
replace it.
CAUTION:
• The bundled batteries are
not chargeable.
• If you do not use the
mouse for a long time,
remove the batteries
• Use new or similar-type
batteries.
1. Remove the USB receiver
from the USB compartment
and then turn the power
switch to 1100dpi for normal
use or to 1600dpi for better
performance.
2. Insert the USB receiver into
your computer's USB port.
NOTES:
• You can store the USB
receiver inside the mouse.
• To save power, turn off the
power when you are not
using the mouse.
Go to ASUS website at www.
asus.com to download the
latest driver for the 4-Way
Scrolling tilt wheel and install
it to use the 4-Way Scrolling
feature.
1. Back and Forward buttons
2. • Tilt wheel (4-Way Scrolling,
driver installation required)
• DPI and battery indicator
3. Aero Flip 3D button
Use this button to instantly
switch between tabs in
Windows® 7.
NOTE: This mouse can work on
almost any surface, even
on 4mm or thicker clean
glass.
Knowing your mouse
Installing the battery
Connecting to PC
Installing the tilt wheel
driver
Your package includes:
a. ASUS WX470 Laser Mouse /
b. Nano USB 2.4 GHz receiver /
c. 3 x AAA batteries / d. Quick
Start Guide
Mouse dimension (mm):
105(L)x66(w)x37(H)
Mouse weight: 82g (without
battery)
Resolution: 1100/1600dpi
1. Remove the cover from
under the notch as shown.
2. Insert up to three batteries
into the slots, taking note of
the correct polarity.
3. Press the cover in the
direction of the arrows to
replace it.
CAUTION:
• The bundled batteries are
not chargeable.
• If you do not use the
mouse for a long time,
remove the batteries
• Use new or similar-type
batteries.
1. Remove the USB receiver
from the USB compartment
and then turn the power
switch to 1100dpi for normal
use or to 1600dpi for better
performance.
2. Insert the USB receiver into
your computer's USB port.
NOTES:
• You can store the USB
receiver inside the mouse.
• To save power, turn off the
power when you are not
using the mouse.
Go to ASUS website at www.
asus.com to download the
latest driver for the 4-Way
Scrolling tilt wheel and install
it to use the 4-Way Scrolling
feature.
1. Back and Forward buttons
2. • Tilt wheel (4-Way Scrolling,
driver installation required)
• DPI and battery indicator
3. Aero Flip 3D button
Use this button to instantly
switch between tabs in
Windows® 7.
NOTE: This mouse can work on
almost any surface, even
on 4mm or thicker clean
glass.
Knowing your mouse
Installing the battery
Connecting to PC
Installing the tilt wheel
driver
Your package includes:
a. ASUS WX470 Laser Mouse /
b. Nano USB 2.4 GHz receiver /
c. 3 x AAA batteries / d. Quick
Start Guide
Mouse dimension (mm):
105(L)x66(w)x37(H)
Mouse weight: 82g (without
battery)
Resolution: 1100/1600dpi
1. Remove the cover from
under the notch as shown.
2. Insert up to three batteries
into the slots, taking note of
the correct polarity.
3. Press the cover in the
direction of the arrows to
replace it.
CAUTION:
• The bundled batteries are
not chargeable.
• If you do not use the
mouse for a long time,
remove the batteries
• Use new or similar-type
batteries.
1. Remove the USB receiver
from the USB compartment
and then turn the power
switch to 1100dpi for normal
use or to 1600dpi for better
performance.
2. Insert the USB receiver into
your computer's USB port.
NOTES:
• You can store the USB
receiver inside the mouse.
• To save power, turn off the
power when you are not
using the mouse.
Go to ASUS website at www.
asus.com to download the
latest driver for the 4-Way
Scrolling tilt wheel and install
it to use the 4-Way Scrolling
feature.
1. Back and Forward buttons
2. • Tilt wheel (4-Way Scrolling,
driver installation required)
• DPI and battery indicator
3. Aero Flip 3D button
Use this button to instantly
switch between tabs in
Windows® 7.
NOTE: This mouse can work on
almost any surface, even
on 4mm or thicker clean
glass.
Knowing your mouse
Installing the battery
Connecting to PC
Installing the tilt wheel
driver
Your package includes:
a. ASUS WX470 Laser Mouse /
b. Nano USB 2.4 GHz receiver /
c. 3 x AAA batteries / d. Quick
Start Guide
Mouse dimension (mm):
105(L)x66(w)x37(H)
Mouse weight: 82g (without
battery)
Resolution: 1100/1600dpi
1. Remove the cover from
under the notch as shown.
2. Insert up to three batteries
into the slots, taking note of
the correct polarity.
3. Press the cover in the
direction of the arrows to
replace it.
CAUTION:
• The bundled batteries are
not chargeable.
• If you do not use the
mouse for a long time,
remove the batteries
• Use new or similar-type
batteries.
1. Remove the USB receiver
from the USB compartment
and then turn the power
switch to 1100dpi for normal
use or to 1600dpi for better
performance.
2. Insert the USB receiver into
your computer's USB port.
NOTES:
• You can store the USB
receiver inside the mouse.
• To save power, turn off the
power when you are not
using the mouse.
Go to ASUS website at www.
asus.com to download the
latest driver for the 4-Way
Scrolling tilt wheel and install
it to use the 4-Way Scrolling
feature.
1. Back and Forward buttons
2. • Tilt wheel (4-Way Scrolling,
driver installation required)
• DPI and battery indicator
3. Aero Flip 3D button
Use this button to instantly
switch between tabs in
Windows® 7.
NOTE: This mouse can work on
almost any surface, even
on 4mm or thicker clean
glass.
Knowing your mouse
Installing the battery
Connecting to PC
Installing the tilt wheel
driver
Your package includes:
a. ASUS WX470 Laser Mouse /
b. Nano USB 2.4 GHz receiver /
c. 3 x AAA batteries / d. Quick
Start Guide
Mouse dimension (mm):
105(L)x66(w)x37(H)
Mouse weight: 82g (without
battery)
Resolution: 1100/1600dpi
1. Remove the cover from
under the notch as shown.
2. Insert up to three batteries
into the slots, taking note of
the correct polarity.
3. Press the cover in the
direction of the arrows to
replace it.
CAUTION:
• The bundled batteries are
not chargeable.
• If you do not use the
mouse for a long time,
remove the batteries
• Use new or similar-type
batteries.
1. Remove the USB receiver
from the USB compartment
and then turn the power
switch to 1100dpi for normal
use or to 1600dpi for better
performance.
2. Insert the USB receiver into
your computer's USB port.
NOTES:
• You can store the USB
receiver inside the mouse.
• To save power, turn off the
power when you are not
using the mouse.
Go to ASUS website at www.
asus.com to download the
latest driver for the 4-Way
Scrolling tilt wheel and install
it to use the 4-Way Scrolling
feature.
1. Back and Forward buttons
2. • Tilt wheel (4-Way Scrolling,
driver installation required)
• DPI and battery indicator
3. Aero Flip 3D button
Use this button to instantly
switch between tabs in
Windows® 7.
NOTE: This mouse can work on
almost any surface, even
on 4mm or thicker clean
glass.
Knowing your mouse
Installing the battery
Connecting to PC
Installing the tilt wheel
driver
Your package includes:
a. ASUS WX470 Laser Mouse /
b. Nano USB 2.4 GHz receiver /
c. 3 x AAA batteries / d. Quick
Start Guide
Mouse dimension (mm):
105(L)x66(w)x37(H)
Mouse weight: 82g (without
battery)
Resolution: 1100/1600dpi
1. Remove the cover from
under the notch as shown.
2. Insert up to three batteries
into the slots, taking note of
the correct polarity.
3. Press the cover in the
direction of the arrows to
replace it.
CAUTION:
• The bundled batteries are
not chargeable.
• If you do not use the
mouse for a long time,
remove the batteries
• Use new or similar-type
batteries.
1. Remove the USB receiver
from the USB compartment
and then turn the power
switch to 1100dpi for normal
use or to 1600dpi for better
performance.
2. Insert the USB receiver into
your computer's USB port.
NOTES:
• You can store the USB
receiver inside the mouse.
• To save power, turn off the
power when you are not
using the mouse.
Go to ASUS website at www.
asus.com to download the
latest driver for the 4-Way
Scrolling tilt wheel and install
it to use the 4-Way Scrolling
feature.
1. Back and Forward buttons
2. • Tilt wheel (4-Way Scrolling,
driver installation required)
• DPI and battery indicator
3. Aero Flip 3D button
Use this button to instantly
switch between tabs in
Windows® 7.
NOTE: This mouse can work on
almost any surface, even
on 4mm or thicker clean
glass.
Knowing your mouse
Installing the battery
Connecting to PC
Installing the tilt wheel
driver
Your package includes:
a. ASUS WX470 Laser Mouse /
b. Nano USB 2.4 GHz receiver /
c. 3 x AAA batteries / d. Quick
Start Guide
Mouse dimension (mm):
105(L)x66(w)x37(H)
Mouse weight: 82g (without
battery)
Resolution: 1100/1600dpi
1. Remove the cover from
under the notch as shown.
2. Insert up to three batteries
into the slots, taking note of
the correct polarity.
3. Press the cover in the
direction of the arrows to
replace it.
CAUTION:
• The bundled batteries are
not chargeable.
• If you do not use the
mouse for a long time,
remove the batteries
• Use new or similar-type
batteries.
1. Remove the USB receiver
from the USB compartment
and then turn the power
switch to 1100dpi for normal
use or to 1600dpi for better
performance.
2. Insert the USB receiver into
your computer's USB port.
NOTES:
• You can store the USB
receiver inside the mouse.
• To save power, turn off the
power when you are not
using the mouse.
Go to ASUS website at www.
asus.com to download the
latest driver for the 4-Way
Scrolling tilt wheel and install
it to use the 4-Way Scrolling
feature.
1. Back and Forward buttons
2. • Tilt wheel (4-Way Scrolling,
driver installation required)
• DPI and battery indicator
3. Aero Flip 3D button
Use this button to instantly
switch between tabs in
Windows® 7.
NOTE: This mouse can work on
almost any surface, even
on 4mm or thicker clean
glass.
Knowing your mouse
Installing the battery
Connecting to PC
Installing the tilt wheel
driver
Your package includes:
a. ASUS WX470 Laser Mouse /
b. Nano USB 2.4 GHz receiver /
c. 3 x AAA batteries / d. Quick
Start Guide
Mouse dimension (mm):
105(L)x66(w)x37(H)
Mouse weight: 82g (without
battery)
Resolution: 1100/1600dpi
1. Remove the cover from
under the notch as shown.
2. Insert up to three batteries
into the slots, taking note of
the correct polarity.
3. Press the cover in the
direction of the arrows to
replace it.
CAUTION:
• The bundled batteries are
not chargeable.
• If you do not use the
mouse for a long time,
remove the batteries
• Use new or similar-type
batteries.
1. Remove the USB receiver
from the USB compartment
and then turn the power
switch to 1100dpi for normal
use or to 1600dpi for better
performance.
2. Insert the USB receiver into
your computer's USB port.
NOTES:
• You can store the USB
receiver inside the mouse.
• To save power, turn off the
power when you are not
using the mouse.
Go to ASUS website at www.
asus.com to download the
latest driver for the 4-Way
Scrolling tilt wheel and install
it to use the 4-Way Scrolling
feature.
1. Back and Forward buttons
2. • Tilt wheel (4-Way Scrolling,
driver installation required)
• DPI and battery indicator
3. Aero Flip 3D button
Use this button to instantly
switch between tabs in
Windows® 7.
NOTE: This mouse can work on
almost any surface, even
on 4mm or thicker clean
glass.