Icon7 S450 Bluetooth Laser Mouse for Notebooks 1／9 file:///D:/EMC/data/icon7%20S450/S450_UM_HTML/S450_UM_HT...
Icon7 S450 Bluetooth Laser Mouse for Notebooks 2／9 file:///D:/EMC/data/icon7%20S450/S450_UM_HTML/S450_UM_HT... Specifications • Welcome Model No.
Icon7 S450 Bluetooth Laser Mouse for Notebooks 3／9 file:///D:/EMC/data/icon7%20S450/S450_UM_HTML/S450_UM_HT... Bluetooth® Pairing 1. In order to connect with a computer that was not paired with S450 before. Turn on the mouse power, and press the button to enter Bluetooth® pairing mode. The connection LED starts flashing blue. If light does not flash blue or turns off after flashing, repeat these steps to try pairing again. 2. Follow the connection instructions on your computer as described below.
Icon7 S450 Bluetooth Laser Mouse for Notebooks 4／9 file:///D:/EMC/data/icon7%20S450/S450_UM_HTML/S450_UM_HT... 7. Select Icon7 S450 Bluetooth Laser Mouse on the Bluetooth Device Selection screen and click Next. Wait for your computer screen to display a message that your S450 mouse is ready for use. Toshiba® 1. Double-click Bluetooth Settings icon located at the bottom of the screen, and then click New Connection. 2. Select Express Mode and click Next. 3. Press the Pairing Button on S450 mouse.
Icon7 S450 Bluetooth Laser Mouse for Notebooks 5／9 file:///D:/EMC/data/icon7%20S450/S450_UM_HTML/S450_UM_HT... 5. Click Finish. Mac® 1. Click System Preferences, then click Bluetooth. 2. Click Set Up New Devices. 3. Click Continue. 4. Press the Pairing Button on S450 mouse. The connection LED starts flashing blue. 5. Select Mouse from the device list, and click Continue.
Icon7 S450 Bluetooth Laser Mouse for Notebooks 6／9 file:///D:/EMC/data/icon7%20S450/S450_UM_HTML/S450_UM_HT... 6. Select Icon7 S450 Bluetooth Laser Mouse on your computer screen, and then click Continue. 7. On the Conclusion screen, click Quit. Bluetooth® Reconnecting S450 will automatically pair with the last connected computer upon power ON. In reconnecting the computer, the connection LED does double-flashing blue.
Icon7 S450 Bluetooth Laser Mouse for Notebooks 7／9 file:///D:/EMC/data/icon7%20S450/S450_UM_HTML/S450_UM_HT... 3. Click Next to begin installation. 4. Click OK to complete the installation. TOP Customizing Settings You can select functions for each button, set scroll speed, mouse speed and configure other advanced settings through the iConfig™ software. Launching the iConfig™ Software You can open the iConfig™ software in two different ways: • Double-click the Icon7 iConfig icon in the taskbar.
Icon7 S450 Bluetooth Laser Mouse for Notebooks 8／9 file:///D:/EMC/data/icon7%20S450/S450_UM_HTML/S450_UM_HT...
Icon7 S450 Bluetooth Laser Mouse for Notebooks 9／9 file:///D:/EMC/data/icon7%20S450/S450_UM_HTML/S450_UM_HT... 3. Locate the iConfig™ program in the program list. 4. Click Remove. 5. A confirmation message will appear. Click Yes to uninstall or No to cancel. TOP Troubleshooting If you have any problems with your mouse, please check the following: Check the system requirements to make sure that your system is compatible. Check to see if the USB connector is securely connected to your PC via a USB port.
PRINTING INFO File Name S450_QG.ai Project S450 Contact Person Johnny Wang Contact Number 886-2-8790-2577 ext.118 Document type Illustrator CS3 Material 105磅銅版紙 Finish Size 375*250 mm Color BLACK單色雙面印刷 S450 FCC Statement Bluetooth This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
