Bluetooth® Laser Mouse VGP-BMS77 User’s Manual X-XXX-XXX-XX(1) © 2008 Sony Corporation Printed in Japan Thank you for purchasing it. If it doesn't defend notes for safety, an electric product might become a fire and an accident resulting in injury or death.。 Please often read this manual and use the product safely. Please keep it in the place in which it is always seen after it reads. For Safety The Sony product is designed safely considering it enough.
Abnormality occurs z When the smoke comes out z Abnormal sound z the water and the foreign material enter inside z When the product is dropped and/or the cabinet being broken ① ② Power of the mouse is turned off Repair is requested at the VAIO customer link repair window → The AC adaptor is not brandished. It is likely to hit the person and the glass, etc. and to injure. The power supply code is not damaged. When the power supply code is damaged, it might cause a fire and the electric shock.
In a packed train in crowded places such as the use of the machine At the place where it has the possibility the person who the heart pacemaker is installed being, there is a possibility of producing effect on operation of the pacemaker with radio wave near.
The AC adaptor is not touched by a wet hand. The AC adaptor might be pulled out, be opened with a wet hand, and then, it causes the electric shock. It doesn't touch this machine and the AC adaptor under energizing for a long time. When the skin remains touching for a long time, it might cause the low temperature burn. The heat not used with this machine and the AC adaptor covered with the cloth oneself, and the case might be transformed, and it cause a fire. When moving, the AC adaptor has to pull out.
z Don't put it in the fire. The short is not allowed. z z z z Don't heat it with the microwave oven and the oven. It might be short when carrying, and keeping it with the metals. Don't charge and leave it under and near the fire and hot weather. When the liquid that leaks from a built-in battery catches one's eye, please consult the doctor at once after washing in clear water. Don't strike the built-in batter. Please do not give strong shock, do not put the heavy stuff, and turn the heat by dropping.
2. Please promptly change the use place of this machine when the electric wave interference is generated between this machine and "Other wireless stations" by any chance or stop the operation of the equipment (the electric wave is stopped). 3. Please inquire of the VAIO customer link when trouble and an uncertain point occurs. This wireless applications use 2.4GHz bandwidth. The FH-SS modulation method is adopted as a modulation method, and the distance is 20m.
z z z z The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., andany use of such marks by Sony Corporation is under license. Other trademarks and Trade names are those of their respective owners. All other names of systems, products, and services are trademarks of their respective owners. In this manual, the ™ or ® marks are not specified. In this manual, Microsoft® Windows® XP Home Edition and Microsoft® Windows® XP Professional are referred to as Windows XP.
1 Connect cradle DC IN 5.2 V connector to AC adapter ①、AC And connect AC adapter to power code②、and inserts it in the power supply.③. 2 Put mouse on the cradle The status lamp lights to the umber color when the charge starts. When the status lamp is turned off, the charge is completed. Charge time z When the amount of the remainder of a built-in battery is enough, lamp turns off after amber LED lights 3~4 sec. In the meantime battery is not charging for protection.
Use personal computer installed the Bluetooth software to connect the mouse. Please see "Bluetooth equipment connection guide" of the attached paper about the method of the connection. HINT As for the Bluetooth software there are times when operation differs depending upon the personal computer of errand.
*Attention* z Indication of the picture speed regulation are times when it differs depending upon the type of personal computer which has been used. z When adjusting the speed of the pointer, the home page of VAIO customer link (http://vcl.vaio.sony.co.jp/) please verify Basic Function Turn power switch ON on the back side of mouse. 1.Wheel button The scroll operation can be done easily by clicking the scroll bar of the window when the wheel button is used.
1600 dpi: middle button Attention in use Use and the inventory location Please do not use in the place where direct sunshine strikes and do not keep it where a lot of moistures exists and where the temperature is high and temperature is various. Operation z z Please put and use it on the horizontal place. Please avoid a rapid temperature change. It might be dewy internal. Bluetooth communications z z z z The 2.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. After-sales service Check first when you have trouble Please see again examine this manual Please contact the VAIO customer link when the condition is still bad. Please see the written guarantee about the VAIO customer link. Repair during guaranteed term Based on the content of the description of the written guarantee.
z State of breakdown：as detail as you can z Purchase Date： Main Feature ■ Mouse Communication method Reading method Bluetooth Ver.2.0+EDR Laser sensor Resolution 800/1200/1600 account Frequency 2.4 GHz（Bluetooth） Power voltage DC 3.7 V （built-in battery） Battery life About 1 month (full charged） Communication Max. 10 m distance Dimension 56.4（W） x 34.1（H） x 121.7（D） mm Weight 110 g（battery imbedded） ■ Cradle Dimension 62.2（W） X 56.5（H） X 75.
Power cord（1） Li-On battery （1） User manual （1） Warranty card（1） Troubleshooting Before you consult VAIO customer link, already 1 times please try checking. When even then condition is bad, please consult VAIO customer link. Condition Action The mouse does Other mouse buttons are being pressed not turn on when I while the power switch is set to ON. set the power → If the power switch is set to ON while other mouse switch to ON. buttons are being pressed, the mouse will not turn on.
while operating the mouse, the mouse goes into a standby state for about 1 minute and cannot be operated during this time. If you press the CONNECT button, reset the power switch of the mouse once to ON before beginning operation. The mouse may have difficulty communicating in an environment with 2.4 GHz wireless LAN or other Bluetooth communication. →It is best to use the mouse in a location with low interference from wireless devices.
move the mouse. mouse. Wait a few moments for the processing to finish before using the mouse. → You may find some useful solutions in your personal computer’s operating instructions. Refer to the manuals provided with your personal computer. The mouse batteries are exhausted. → If the power does not come on when the power switch is set to ON, replace the batteries. For details, see “Inserting Batteries into the Mouse”. The mouse is not set to ON.
The mouse does →Deactivate the Bluetooth connection, wait a few not move smoothly seconds, and then reestablish connection. after returning from the power saving mode. The mouse is not found when the Bluetooth device search is performed. z The mouse is unable to be detected. → Press the CONNECT button located on the bottom of the mouse, and then try the search again. z The power switch on the mouse is set to OFF. → Check the power switch setting on the bottom of the mouse.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
