QUICK START GUIDE
WELCOME TO YOUR Sharing your screen with your SlimPort NANO·CONSOLE is as easy as using your phone. Use this quick start guide to begin.
HERE’S WHAT COMES WITH YOUR NANO·CONSOLE.
SETTING UP YOUR NANO·CONSOLE Your NANO·CONSOLE is designed to hold your device as it connects to larger displays. One side of the base has a raised lip. Attach the tower to the base so the writing on the top of the tower (“SlimPort NANO·CONSOLE”) reads from left to right when aligned with the lip. The NANO Remote is designed to rest on the surface of the tower. See page 8 for more information on how to use the NANO Remote.
CONNECTING YOUR DEVICE TO THE NANO·CONSOLE Plug the Micro-USB connector that is permanently attached to the NANO·CONSOLE into the Micro-USB port on your SlimPort-enabled device. Tip: You can also charge your device by plugging the provided untethered Micro-USB cable into the NANO·CONSOLE and then into your device’s USB wall charger as normal.
CONNECTING YOUR NANO·CONSOLE TO YOUR TV OR MONITOR Connect your NANO·CONSOLE by running an HDMI cable from the HDMI OUT port on the NANO·CONSOLE to an HDMI IN port on your big screen. To your device’s wall charger or USB port on your TV Tip: The NANO·CONSOLE includes an auxiliary port you can use to connect other devices that have a high-definition video output to your TV or monitor as needed.
SEEING YOUR SMALL SCREEN ON THE BIG SCREEN Set the input on your TV or monitor to the HDMI port the NANO·CONSOLE is connected to. After a few moments, the device’s screen should now be visible on the TV or monitor.
YOUR NANO REMOTE Main Touchpad The NANO Remote is how you interact with your device on the big screen. It’s designed to mimic the experience of using your device in your hand. Note: If your device is not running Android 5.1 or later, the Recent Apps button will not do anything when you press it.
SETTING UP YOUR NANO REMOTE The NANO Remote comes with two CR2032 coin batteries. To activate the batteries and power the remote, pull the plastic tab sticking out of the battery tray. This allows the batteries to power the remote. Note: You should not need to remove the tray for this. Note: There is no on/off switch on the NANO Remote; the remote will automatically go into sleep mode after 3 minutes of inactivity. It will wake up when you click on the touchpad.
CHANGING YOUR NANO REMOTE’S BATTERIES When you need to replace the batteries, remove the tray, discard the old batteries and fit new ones into the tray with the + side facing down. The battery tray only fits into the remote one way. If you try and put the battery tray in upside-down it will not slide in easily. Note: With average use, the batteries should last approximately 3 months before needing to be replaced.
CONNECTING THE NANO REMOTE TO YOUR DEVICE The NANO Remote connects to your device via a version of Bluetooth® called, Bluetooth Smart (also referred to as Bluetooth Low Energy). Once the batteries have been installed, hold the volume + button and the touchpad button simultaneously for 3 seconds. The LED light on the remote will begin to blink. The remote is now Bluetooth discoverable. BLUETOOTH SETTINGS NANO.
USING THE VOLUME BUTTON The +/- Volume Button on the right side of your NANO Remote allows you to increase and lower the volume of your audio out from your phone. Tip: Depending on your device manufacturer and the version of Android you are using, pressing the Volume Button will increase and decrease volume a little bit at a time, or it can turn on sound or mute the sound. Fun tip: When using the standard Android camera app, pressing “+” on the Volume Button will take a picture.
GETTING THE HANG OF THE NANO REMOTE The touchpad of the remote works like the screen of your device. When using the remote, a cursor will indicate where your finger would be on the screen. Click the main touchpad to reproduce a tap, click and hold to drag items and scroll through documents and screens. Take a moment to practice clicking, dragging items, navigating from one screen to another and scrolling through documents. Using apps you’re familiar with should shorten the learning curve a bit.
THE LED LIGHT ON YOUR NANO REMOTE The LED light on the front of your NANO Remote will blink several different ways to communicate different things.
TROUBLESHOOTING If your device screen does not appear on the TV or monitor: • Check that the HDMI cable is firmly and securely plugged into the HDMI OUT port of the tower and an HDMI IN port on your TV or monitor. Check that the Micro-USB cable from the tower is firmly and securely inserted into the mobile device. • Check that the correct input is selected on the TV. • Make sure your device’s screen is on.
If you are having trouble pairing the NANO Remote to your device: • Make sure your NANO Remote is in Bluetooth pairing mode. In the Bluetooth settings screen on your device, press the “Search for devices” menu item so your device can look for the discoverable NANO Remote. • Turn off Bluetooth on your device, turn back on Bluetooth on your device, and start the pairing process again. • Another device may have been previously paired to the NANO Remote.
SAFETY, COMPLIANCE, AND WARRANTY United States Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Responsible party information Analogix Semiconductor, Inc. 3211 Scott Boulevard, Suite 100 Santa Clara, CA 95054 USA +1-408-988-8848 Canada This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Korea 해당무선설비는전파혼신가능성이있으므로인명안전과관련된서비스는할수없음. 이기기는가정용(B급) 전자파적합기기로서주로가정에서사용하는것을목적으로하며, 모든지역에서사용할수있습니다. Taiwan 低功率電波輻射性電機管理辦法 第十二條 經型式認証合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變 更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信﹔經發現有干擾現象時，應立即停用，並改善 至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 製造者: 東莞東聚電子電訊製品有限公司 進口商: Analogix Taiwan Office 進口商地址: 6F., No.
BEFORE RETURNING THIS PRODUCT If you have any questions or concerns about your SlimPort NANO·CONSOLE, please go to www.nanoconsole.com/support for help, or email us at support@analogix.com. ©2015 Analogix Semiconductor, Inc. All rights reserved. SlimPort and NANO•CONSOLE logos are trademarks of Analogix Semiconductor, Inc.; SlimPort is a trademark of Analogix Semiconductor, Inc., which may be registered in various jurisdictions. Reg. U.S. Pat. & Tm. Off. Android is a trademark of Google Inc.
