Specification

800-222-5116 | primexplastics.com/bubblex
Strength Rating High Avg
Impact Strength *
Low Temperature Impact Strength *
Tensile Strength *
Flexural Modulus *
Compression Strength *
*Compared to standard Cor-x.
Specs Test Method Value Unit
Board Weight 120 g/sqft
Tensile Strength ASTM D638 838 PSI
Flexural Modulus ASTM D790 85,000 PSI
Compression Strength Internal 175 LBF
90
º
Corner Crush Internal 270 LBF
Instrumented Impact ASTM D3763 150 LBF
Properties %
Weight per 1000 sq. ft. +/- 5
%
Nominal Thickness +/- 5
%
Thickness +/- 5
%
Nominal Dimensional Tolerances
Maximum Width 60” Corona Treated
Flatness +/- 1/4”
Width +/- 1/4”/-0
Length
48” OR LESS: +1/2” / -0”. For
each additional 12”, add 1/8”.
Squareness
1/2” differential on measured diagonal
to 48”. For each additional 12”, add 1/8”
Prime Bubble-X is a sheet / air-bubble
co-extruded PP board. A new patented
technology, it is a co-extruded board made
of three layers: a central thermoformed
core, and two at, compact “external skins”
with “matte” nishes. These external layers
are smooth and corona-treated to provide
outstanding printing performance.
Prime Bubble-X
TM
Please contact your Primex Plastics representative
for more informationon nishing, fabricating,
or the thermoforming process.
Applications
Prime Bubble-X is ideal for point of
purchase displays, signs, mail totes,
sleeve pacsks and other types of
containers. The smooth surface provides
increased printability compared
to our traditional “Cor-x” board.
Colors, Textures and Capabilities
Our Prime Bubble-X PP comes
in a White or Gray.
Finishing
Prime Bubble-X PP can be fabricated
by drilling, routing, sawing, die
cutting, and laser cutting.