User's Manual

Configuring 3-7
Note: Be sure that there is no AP inserted at this installation
stage.
Installing the Wireless Access Point SNMP manager
In order to install the SNMP manager, run the program setup.exe
which may find in the CD . Follow the instructions of the set-up program
and select the directory where the application will be installed. A
window wizard appears indicating the completeness of the installation
process.
Configuring the Wireless Network Access Point with
the SNMP Manager
 Before configure the AP by the SNMP Manger utility ,Please set
the Access Point IP address following the procedure described
below. On the Windows Start Menu, choose
Start->Programs->SNMP Manger
 Connect to Access Point –You can directly connect with the
Access Point by typing the appropriate IP address and community
in the panel,(The default password is” public”). Additionally you
select the User or Administrator Authority in the Authority
combo-box. User Authority allow you to view the Access Point
Configuration only, while Administrator Authority allow you to view
or change to the Access Point Configuration. After the above
configuration setting, press “OK”.