User's Manual

Configuring 3-9
4.If the above error message appears, please check whether the AP
has and appropriate IP address and been connected to the network.
5.a message “Get Configuration done” and the “IP Address” will appear
at the left and right button of the manual box once the connection
between the Access point been established.
 File menu: The file menu contains the following enabled
submenus
●
Close Connection AP
– Terminates the connection with the
Access Point.
●
Download changes
– When all the desired values of the
parameters have been set you are able to download the
changes (save the changes) to the Access Point by selecting
this submenu.
●
Options
– Defines the polling interval according to which the
SNMP Manager polls the Access Point in order to update the
Associated Stations List.
 Setup Menu: You are able to view or set the Access Point
parameters under the “Setup” menu, the section consists of
following submenus.
Setup->Bridge->IP Configuration or Filtering
●
IP Configuration
–
The “IP Address” and “IP Mask” can be modified through “IP
Configuration”, if DHCP client is not enabled. If DHCP client is
enabled the IP Address field displays the IP Address that was
dynamically assigned to the AP by the network DHCP server
and the IP Mask field displays the IP Mask utilized by the
network DHCP server. Additional you have to select the Primary
Port which is the interface that determines the “File” menu in
order to save them.