User's Manual

Chapter
2
Installation
Installation 2-1
Before you proceed with the installation, it is necessary that you have
enough information about the Wireless Access point
2.1 Hardware Connection
1. Locate an optimum location for the Wireless Network Access
Point.
The best place for your Wireless Network Access Point is
usually at the center of your wireless network, with line of sight to all
of your mobile stations.
2. Fix the direction of the antenna . Try to place it in a position which
can best cover your wireless network . Normally, the higher you place
the antenna, the better the performance will be. The antenna’s
position enhances the receiving sensitivity.
3. Connect an RJ-45 to the Wireless Network Access Point. Then,
connect the other end of the
E
thernet cable to a switch or hub.
W
ireless
Network
Access Point will then be connected to the 10/100
Network.
4. Connect the
AC
Power Adapter to the
W
ireless
N
etwork
A
ccess
P
oint’s.
Power
5. Then, power on the Access Point.