User's Manual

77
§ Your name and company name
§ SSID (This will be the SSID or network name immediately after installation,
note that you can always change this after the installation).
After the software installation you may be asked to reboot once more, after which the
installation is complete.
Important: On most systems it is necessary you reset the bridge after installation
of the software. At this time, reset the bridge using the reset button or by “power-
cycling” the bridge.
You can now use the Bridge Device Manager; turn to page 12 for instructions on how
to use the Bridge Device Manager. Additional information on using the various
switches and connectors on the bridge can be found on page 14.