User's Manual

D. Connect the AP to the Ethernet port and boots up the APM utility to start the configuration.
3.2 Configuring the Wireless LAN Module with the APManager
On the Windows Start Menu, choose “Start Programs” -> “APManager” Using this option you can
directly connect to the AP.
● Find the Module
1)
This submenu allows you to find and connect to the Module without knowing its IP address. Click
“Discovery” in order to find the Module. Window appears indicating the IP Address of the Module
and select “IP Address”. Then click “Configuration” to configure the Module.
Note: In order to find Module, Module and computers must resident in the same subnet. The default IP of
Module is “192.168.1.1”. You will also need to set your IP address of your PC to “192.168.x.x” and
subnet to “255.255.0.0”.