User's Manual

□ Wireless Setting：
 Reject broadcast probe: When checked the Module broadcasts the ESSID to the stations, if
not checked then the stations must know the Module ESSID in advance.
 Channel ID: There are 14 channels available. The channels differ from country to country.
Select the channel to be used.
 ESSID: It is an ASCII string up to 32 characters used to identify a WLAN that prevents the
unintentional merging of two co-located WLANs. The ESSID value must be the same in all
stations and AP in the extended WLAN. Select the ESSID to be used.
 Device Name: The name of the Module.
 Rate: By default the unit adaptively selects the highest possible rate for transmission. Select
the Basic & Data rates to be used among the following options: 1, 2, 5.5, 11(Mbps).
 Preamble Type (Short / Long): Preamble is the first sub-field of the PPDU. It’s an
appropriable frame format for transmission between PHY (Physical layer). There are two
preamble types: short and long. The Short Preamble option improves throughput performance.
 Beacon Interval: Set the Beacon Period parameter, which specifies the duration between
Beacon packets (milliseconds). The range for the Beacon Period is between the range
20-1000 with a typical value of 100.
 RTS Threshold: Minimum packet size to require an RTS Request To Send. For packets
smaller than this threshold, an RTS is not sent and the packet is transmitted directly to the
WLAN. This is the option for the RTS Threshold activation.
 Frag. Threshold: The size at which packets will be fragmented. Choose a setting within a
range of 256 to 2346 bytes.