User's Manual

Am1772™ Terminal User’s Manual AMD CONFIDENTIAL: for NDA Use Only
Version 1.03 Page 15 of 22
4.5.2 Connecting to a Network
The Am1772 Terminal application can be used for connecting to an existing
infrastructure or ad-hoc network. The “Connect to Wireless Network” dialog box
displays the available wireless networks.
The “Rates...” button brings up a separate dialog box to specify the supported rates
to be reported for the station. It is recommended to not change the default values in
this dialog box.
4.5.3 Disconnecting
When the wireless network adapter is connected to a network, or when the wireless
network adapter has started its own network, the “Reset” button on the “Network”
tab can be used to close the connection. A warning message will be displayed:
Clicking “Yes” disconnects the station from the network; clicking ”No” retains the
existing connection.