User's Manual

Wireless LAN CardBus Card
5
4. Restart the Operating System
After installing the new driver, you must restart the operating system. Click the
Start button in the taskbar, choose the Shut Down... command in the command
menu, click the Restart radio button in the dialog box, and then click the OK
button.
Once Windows starts, it displays the New Hardware Found wizard, followed
immediately by the Configuration menu of the PRISM Configuration utility.
Examine this information and make any necessary changes (for example, you may
need to specify an SSID or encryption keys to reconnect to your network). After
you enter the correct information, click the OK button.
Windows then displays a warning box, telling you that your system settings have
changed and that you must restart your computer to implement these changes.
Click the Yes button to restart the operating system. Windows then restarts, and
your PRISM Wireless LAN adapter will operate normally with the new driver.