User Manual

Proceed to section 5 for the explanation of the Configuration Utility.
Page 13
Wireless LAN 11 Mbps User manual
4.6. Installation Procedure for windows 2000 / Windows ME
NOTE : DO NOT INSERT THE PC CARD UNTIL YOU ARE ASKED TO DO SO. FAILURE OF
WHICH MAY RESULT IN UNSUCCESSFUL INSTALLATION OF YOUR WLAN PC
CARD.
In order to install the WLAN 11Mbps PC card successfully, please follow the procedures below step
by step:
1.) Power on your computer and allow WINDOWS 2000 / ME to load fully.
2.) Make sure that there is no PC CARD inserted yet.
3.) Insert the given INSTALLATION CD in the CD-ROM and then click on the SETUP.
4.) Read and accept the license agreement.
5.) Choose the SSID. Default ESSID is default. You can change this later also using the configuration
utility or network configuration. Click on NEXT.
6.) Choose network type and click on NEXT. Default is INFRASTRUCTURE.
7.) Give the path of the destination folder. To set the path of your choice click on BROWSE and
then click NEXT.
8.) Setup will add program icon to the Program Folder. You can enter a new folder name, or choose
one from the existing Folder list.
9.) It takes a few seconds for copying the utility files and then click on Finish.