User's Manual

4-4 Using the Network
Figure 4 displays the Manage Profiles screen in which previously
created profiles can be edited, deleted,renamed and copied. The Copy
command is useful in creating multiple profiles that are similar without
having to reset all options manually.
4.2 Bridge Access Point
As described in the previous paragraph, nodes can be switched from
Wi-Fi to multimedia mode (and vice versa) using the device manager
software. As the Access Point/Bridge does not have a user interface
that can be used to switch between multimedia and Wi-Fi, it employs a
manual mode switch. This switch can be found on the AP and is labeled
accordingly.
ΘʳMode Switch – Used to switch between Multimedia (WhiteCap) and
Wi-Fi mode (Wi-Fi = In; Multimedia = Out)
ΘʳFactory Default Reset – Used to reset all parameters (i.e. SSID,
WEP etc) to the factory default
ΘʳController Reset – Used to reset the BAP (similar to power cycling)
ΘʳPower – Connects to (included) power adapter
ΘʳEthernet Port – Connects to HUB for LAN / Internet connectivity
ΘʳUSB Port – Connects to connector, use for configuration only
(Bridge Manager software required)
4.3 Network Management
The Network Manager will start automatically once you logon to
Windows. The icon in the Windows Tray will appear when the Network
Management software is running. From this Icon the earlier described
Device Management and network management application can be
started (right-click on the icon).
Note that the Network Management Application is ONLY available