Instructions / Assembly
Contact us for assistance: (866) 985-7877 | www.primepelletgrills.com OPERATION | 16
GRILL FUNCTIONS
WARNING!
Always start the grill with the door open and the dial set to IGNITE. After
pellets ignite and produce smoke, close the lid and adjust the dial to your
preferred cooking temperature.
• Whenever the grill is in use or cooling down after grilling, you must
maintain a minimum of 30.48 cm / 12 in between the grill and any
combustibles, including stored pellets.
Prime Pellet Grill Hardwood Pellets. NEVER use heating fuel pellets to
cook food.
• Keep the grease drain pan and the interior of your grill clean to reduce
Shutting Down the Grill: Burn Off Setting
This grill features an automatic shut down cycle. When you’re done cooking,
while running the circulation fan. In ten minutes, the grill will shut down and the
fan will stop.
DANGER! The power switch will shut off the control and the dial will shut
off the grill power. Before servicing or cleaning the grill, controller, or other
components, fully disconnect/unplug the grill from any power source to reduce
the risk of electrical shock.
Your Prime Pellet Grill has two emergency shutoff safety features.
LOW TEMPERATURE ALARM
If the RTD temperature sensor detects sustained temperatures below 125°F, the control will trigger an alarm state and the display will show “LEr.” Power will be cut
to the internal components of the grill (auger and heating rod) until the main power switch is turned OFF (O).
HIGH TEMPERATURE ALARM
If the RTD temperature sensor detects an internal temperature exceeding 550°F, the control will trigger an alarm state and the display will show “HEr.” Power will
be cut to the internal components of the grill (auger and heating rod) until the main power switch is turned OFF (O).
and remedy the issue.
SAFETY FEATURES