Instructions / Assembly

ManualsBrandsPRIME PELLET GRILLS ManualsGrillsKC King 600 Pellet Grill in Black

ASSEMBLY

PREPARATION

Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. READ ALL INSTRUCTIONS BEFORE INSTALLING AND USING THE APPLIANCE.

Place all parts on a soft, level surface for assembly. Tools Required for Assembly

Estimated Assembly Time: 60 Minutes | DO NOT over-tighten hardware!

1

On a protected, level surface on the ground, turn the Grill Body 1 upside-down.

Attach the Wheeled Legs 2 to the HOPPER END of the Grill Body. Legs are not

interchangeable. Find the 2 aligned holes on the inside of each Leg, near the bottom

(wheeled) end. Consult diagram for proper orientation. Align bolt eyelets in each

leg with the eyelets in corners of the skirt panels of the Grill Body. Place a Washer H

on a Bolt B and insert into the front skirt panel and through the leg, fastening with

Washer H, Spring Washer I, and Nut E. Repeat with the same hardware on the

back leg. Insert a Bolt C with Washer H into each of 2 eyelets in the side skirt panel

(on either side of the hopper), and through each Wheeled Leg. Secure with the same

combination of fastening hardware H/I/E.

Attach the Support Legs 3 to the opposite end of the Grill Body. Legs are not

interchangeable. Find the 2 aligned holes on one of each Leg, near the bottom

(footed) end. Consult diagram for proper orientation. Insert Bolt B with Washer H

into the front skirt panel of the grill and through the leg, fastening with Washer H,

Spring Washer I, and Nut E. Repeat with the same hardware on the back leg. Insert

2 Bolts C into the two eyelets in the bottom edge of the side skirt panel, and through

the Wheeled Legs. Secure with the same combination of fastening hardware H/I/E.

Do not fully tighten all hardware yet.

Hardware Used:

B Bolt (5/16-18x65) x4 C Bolt (5/16-18x85) x4

E Nut (5/16) x8 H Washer (5/16) x16

I Spring Washer (5/16) x8

A MAJOR CAUSE OF FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR

SPACES) TO COMBUSTIBLE MATERIALS. IT IS OF UTMOST IMPORTANCE THAT THIS

PRODUCT BE INSTALLED ONLY IN ACCORDANCE WITH THESE INSTRUCTIONS.

H/I/E