Instructions / Assembly
Contact us for assistance: (866) 985-7877 | www.primepelletgrills.com ASSEMBLY | 7
ASSEMBLY
3
Install the Chimney 7: Open the grill door. Align the Chimney Gasket 8 with the open end of the
Chimney, then align both with the eyelets on either side of the exhaust hole on the body of the
grill. Insert 2 Hex Bolts A into the eyelets and fasten them on the inside of the grill using a Washer G
and Nut F on each Hex Bolt.
Fully tighten Chimney hardware.
Hardware Used:
A Hex Bolt (1/4x20) x2
F Nut 1/4 x2
G Washer 1/4 x2
3
2
Attach the Leg Brace 4 between the Support Legs 3 using 4 Bolts D. Repeat to install the Leg
Brace between the Wheeled Legs 2.
Once all 8 Bolts are seated, fully tighten all hardware installed to this point.
With assistance, carefully turn the grill back upright.
Hardware Used:
D Bolt (1/4x20) x8
2
4
D
F/G
8
A
7
4