Instructions / Assembly

Contact us for assistance: [phone] | www.primepelletgrills.com ASSEMBLY | 8
ASSEMBLY
4
Attach the Grill Door Handle 6: Select two Hex Bolts A and Washers G. Place the Washers on
the Hex Bolts and insert one through each eyelet in the grill door into either end of the Grill Door
Handle. Fully tighten both Hex Bolts.
Hardware Used:
A Hex Bolt (1/4x20) x2
G Washer (1/4) x2
4
5
5
A/G
6
A/G

Attach the Haul Handle 5: Select two Hex Bolts A and Washers G. Place Washers on Hex Bolts.
Locate holes in the handle brace on the inside the grill chamber below the exhaust, and insert
one Hex Bolt in each hole as shown. Align threaded bolt holes in each end of the Haul Handle with
Hex Bolts and fasten together. Fully tighten both Hex Bolts.
Hardware Used:
A Hex Bolt (1/4x20) x2
G Washer (1/4) x2