Manualshelf

User`s manual

ManualsBrandsPrime ManualsDigital Video Recorders (DVR)DVST ULTIMA96H-32
31323334353637383940
35
y Use only with 16 channel DVR.
y Adjust interval for ‘X9 Split Screen sequencing’.
y Check 5 check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
y Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
y ‘9 Split Screen sequencing’ is disabled in 4X4 Mode.
4.3.3 Spot Monitor
y Please click ( ) DISPLAY>Spot Monitor and the following screen will appear.
y This menu will allow adjust interval of channel sequencing of Spot monitor.
y Click ( ) Spot Select to choose Spot monitor to be set up.
y Check (check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
y Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
4.3.4 Spot Monitor Control on Display Mode
y PRO 4000 / 8000 / 1600 : Every click of the “SPOT” menu item on mouse right click menu will indicate “SP”, “SP1” on the
right bottom of main monitor.
- SP mode: Sequential display is activated as configured on spot monitor Setup menu.
- SP1 mode: Displayed channel on Spot monitor 1 can be changed by pressing channel button. Sequence stops at “SP1”
mode.
y PRO 4010 / 8010 / 1610, PRO HD08 / HD16, PRO 0808 / 1616 : Every click of the “SPOT” menu item on mouse right
click menu will indicate “SP”, “SP1”, “SP2” and “SP3” on the right bottom of main monitor. After “SP3”, the it shows nothing.
And system gets out of spot monitor control mode.
- SP mode : Sequence is activated as configured on spot monitor Setup menu.
- SP1 mode : Displayed channel on Spot monitor 1 can be changed by pressing channel button. Sequence stops at “SP1”
mode.
- SP2 mode : Displayed channel on Spot monitor 2 can be changed by pressing channel button. Sequence stops at “SP2”
mode.
- SP3 mode : Displayed channel on Spot monitor 3 can be changed by pressing channel button. Sequence stops at “SP3”
mode.
4.3.5 Multi Spot (PRO HD08 / HD16)
y This connection supports multi-channel display (4/9/16) on spot monitor depending on its channels (4/8/16) respectively.
X9 Seq