Manualshelf

User`s manual

ManualsBrandsPrime ManualsDigital Video Recorders (DVR)DVST ULTIMA96H-32
41424344454647484950
47
4.6.1 Alarm In
y Please click ( ) LINK>Alarm In and the following screen will appear.
y Select cameras for recording while the motion sensor is in operation and alarm outputs and set up E-mail addresses for
notification.
y Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
y Please follow the setup procedures below.
① Click ( ) Alarm In frame and select Alarm In 1.
② Select cameras for recording when Alarm In 1 is on. Please check 5 a check box under Link Camera. More than two
cameras can be set.
③ Select alarm outputs to be worked when Alarm In 1 is on. Please check 5 a check box under Link Alarm Out. More than
two alarm outputs can be set.
④ Select E-mail addresses for notification when Alarm In 1 is on. Please check 5 a check box under Link Notification. More
than two E-mail addresses can be set.
⑤ Repeat the above procedure for Alarm In 2~ Alarm In 16 (UP to 4 for PRO 4000 / 8000 / 1600 / Up to 16 for PRO 4010 /
8010 / 1610, PRO HD08 / HD16, PRO 0808 / 1616).
y Choose ‘OK’ to confirm the setting.
4.6.2 Motion Event
y Please click ( ) LINK>Motion Event and the following screen will appear.
y Select cameras for recording while the motion sensor is in operation and alarm outputs and set up E-mail addresses for
notification.
y Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
y Please follow the setup procedures below.
① Click ( ) Motion Event frame and select Motion Event 1.
② Select cameras for recording when Motion Event 1 is on. Please check 5 a check box under Link Camera. More than
two cameras can be set.
③ Select alarm outputs to be worked when Motion Event 1 is on. Please check 5 a check box under Link Alarm Out. More
than two alarm outputs can be set.
④ Select E-mail addresses for notification when Motion Event 1 is on. Please check 5 a check box under Link Notification.
More than two E-mail addresses can be set.
⑤ Repeat the above procedure for Motion Event 2~ Motion Event 16.
y Click( )By Duration box to set up the recording duration and prevent recording caused by event.