User`s manual

66
8.3 Live Video
8.3.1 Network Connection
y As the setup is completed, user should connect CMS to DVR over Network.
y Please click in REMOTE DVR on the screen.
y It will turn to blue, while being activated.
y
Please click REMOTE CONNECT button.
y If a popup window for ID/Password appears, please input ID/Password. The window may not show up at all depending on
Remote Site Login Setup.
(NOTE)
If there is no Admin Password set up in DVR, user may log-in to Admin for CMS and enter without Password.
(NOTE)
Before network connection, be sure that HDD is installed. Otherwise, the DVR will not be connected over network.
y If video does not display, please check Local Setting again.
y Site Tree of DVR will show with the video. Site Tree lists DVR sites being currently connected to the CMS.
y This is Live video of the connected DVR.
y User can connect maximum 16 sites simultaneously.
y If user clicks Remote Disconnect, interface with a site is disconnected.
y
To connect another DVR, please press REMOTE DISCONNECT button to disconnect the current DVR and
connect the new DVR.
y
If wish to exit CMS program, click on Exit CMS button.
y The list below describes functions of each part of the screen.
①
⑪
③
⑫
⑧
④
⑤
⑦
⑨
⑩
⑥
②