User's Manual

7
Note: the user can not power off Prime PT200V if the power key is disabled
by protocol.
4 Frequency
LTE: Band4、Band13
GPS:1575.42MHz
WIFI/BT:2.4GHz
5 Trouble shooting and Safety info
5.1 Trouble shooting
5.2 Safety info
The following items are suggestion for safety use, please pay more attention.
 Please do not disassemble the device by yourself.
 Please do not put the device on the overheating or too humid place, avoid
exposure to direct sunlight. Too high temperature will damage the device or even
cause the battery explosion.
Trouble
Possible Reason
Solution
Messages can’t be
reported to the
backend server by
Mobile network.
APN is wrong. Some APN
can not visit the internet
directly.
Ask the network operator for the right
APN.
The IP address or port of
the backend server is
wrong.
Make sure the IP address for the
backend server is an identified address
in the internet.
Unable to power
off Prime PT200V.
The function of power key
was disabled by
AT+GTFKS.
Enable the function of power key by
AT+GTFKS.
Battery can not be
charged
The battery has not been
used for too long time
and has been locked.
Using a external power source with 3.6V
to 4.2V DC power supply to active the
battery or apply for after sale help.
Prime PT200V can’t
fix GPS successfully.
The GPS signal is weak.
Please move Prime PT200V to a place
with open sky.
It is better to let the top surface face to
the sky. (The same surface with
indication LED)