Owner`s manual

16
Operation
This chapter covers all of the things you can do with the Guides and other features that let you control the way
you use PHD-205 Digital HDTV Tuner. It includes watching TV and using menu.
Watching TV
This paragraph explains simple operations for
watching a TV program. It includes:
 Turning on or off the PHD-205 Digital HDTV Tuner
 Changing the channels
 Adjust volume
 Using the MUTE
 Seeing the Closed Caption
 Displaying the channel information
 Displaying the GUIDE (EPG)
 Audio Preference
Turning on or off the Digital HDTV Tuner
Preparation
Perform the following steps before you turning on the
PHD-205 Digital HDTV Tuner.
1. Insert the batteries into the remote control unit.
(See page 11.)
2. Connect the antenna/cable signal to the PHD-205
Digital HDTV Tuner. (See page 12)
3. Plug in the AC cord to the AC outlet.
Turning on the power
1. Press the POWER switch on the front panel.
2. Press the STANDBY button on the front panel or
press the POWER button on the remote control.
)
Power indicator
ON Lighting(Green)
OFF/Standby Lighting(Red)
Turning off the power
1. Press the STANDBY button on the front panel or
POWER on the remote control.
2. If you are not going to use this PHD-205 Digital
HDTV Tuner for a long period of time, you can
press the POWER switch on the front panel to
switch off power.
Changing the channels
You can change channels in several ways.
Method 1
Press P+/P- button on the remote control or CH+/CH-
button on the front panel to change the channels.
Method 2
Using remote control buttons 0-9, and · (DOT) to
select a channel program.
e.g., channel 8
:
Press 8 → OK
e.g., channel 15.1
:
Press 1 → 5 → · →1 → OK
Method 3
1. Press GO BACK to switch to the previously tuned
channel.
2. Press GO BACK again to switch back to the
currently tuned channel.
)
z GO BACK will not work if no channel has been
changed after the PHD-205 is turned on.
!
T
he channel number and na
me are
displaying on the screen
2.10 WGBH-Dx
Tune to:
15.1_
13
Connections and Setup
AIR/CABLE
Y Pb Pr S
-
video DTV OUT
DOLBY DIGITAL
DVI OUT
(RGB)
OUT
(OPTICAL)
VIDEO L R
AIR/CABLE
Y Pb Pr S
-
video DTV OUT
DOLBY DIGITAL
DVI OUT
(RGB) OUT (OPTICAL)
VIDEO
L R
Connecting to Conventional Analog TV
1. Connect antenna cable to AIR/CABLE jack of
PHD-205 unit. Refer to previous section
“Antenna /RF Connections”.
2. Connect video cable from VIDEO jack to the TV
video (CVBS) input.
3. Or, connect S-Video cable from S-VIDEO jack to
TV S-video input for a better video displaying.
4. Connect audio cable from L-AUDIO-R jacks to
the TV stereo (L/R) audio inputs.
)
z Connecting conventional video signal to
analog TV, you need to set “DTV OUT
SELECT” switch to S/VIDEO position.
z Devices don’t connect “S-VIDEO, RGB and
YPbPr” at the same time.
Connect to Home Theater.
The optical digital audio output provides the highest
quality audio. You can connect it to your home
theater.
Connect an optical cable (not include) to the back of
the PHD-205 Digital HDTV Tuner using the connector
marked DOLBY DIGITAL OUT. Connect the other
end of this cable to the optical input on the back of
your Home Theater.
Check the Owner’s Guide for the Home Theater for
proper set-up and operation.