Owner`s manual

25
Oti
Reference
Aspect Ratio
You can select an aspect ratio of the “Normal”, “Full
Screen”, “Panoramic”, Zoom1”, “Zoom2”, “Direct”,
and “Custom” from this menu option. Or, you can
press ASPECT button on the remote control to
directly access and select the aspect ratio option.
See Page 6 and 22 for more information on Aspect
Ratio adjustments.
Dynamic Contrast
You can set dynamic contrast control on or off with
this option.
Flesh Tone
Automatic flesh tone correction improves the
reappearance and color enhancement. Use this
option to set flesh tone function on or off.
Game Mode
To set this option on or off when connecting video
game console to PHD-8VX input.
RESET PICTURE
PHD-8VX can individually reset picture and audio
settings to the default mode. Select this option to
reset all the picture settings to the original default
values.
Channel
1. Highlight “Channel” option on MENU to adjust
channel settings. Press OK or ►.
2. Press ▲/▼ to highlight the item: Tuner, Additive
Scan, Auto Scan, Add-Channel, Master List,
Channel Name Edit, Favorites1, Favorites2,
Favorites3.
3. Press OK or ► to select an option.
4. Press EXIT to exit.
Tuner
This item is selecting an option of RF Input.
“Antenna” is over-the-air (outdoor or indoor antenna).
“CABLE” includes the type of “STD”, “IRC”, and
“HRC”. If it is selected, system will auto detecting the
cable types.
)
z PHD-8VX has built-in dual channel scanning
capability.
z Once scanned Antenna and Cables channels,
PHD-8VX can save both channel information
into internal memory. Upon user selects specific
RF input, PHD-8VX can change all channel lists
from memory without re-scanning channels.
Additive Scan
Use this option to automatic scan signal and add any
new available channels on master list.
Auto Scan
After selected a type of the RF Input, then you can
select “Start Scan”.
PHD-8VX Digital HDTV Tuner will scan both digital
and analog channels.
You can watch the TV as finish to scan.
)
z This step may take 10-15 minutes or more.
z All the current stored channels will be deleted or
replaced with new channel information after
doing ‘Start Scan’.
Add-Channel
Using this option, you can add a channel on a
particular frequency, which refers to physical
channels, not the virtual channels.
You can use the number button (0-9) on the remote
control to find digital channels.