Owner's manual

14
SECTION 3: INTERPRETING THE LED STATUS LIGHTS
The LED Status Lights, located on Conductor’s front panel, can tell you a lot about what is
happening at any given moment with the operation of the autoloader. To accurately interpret what
is meant when the lights are on, off or flashing, refer to the following chart:
A. Power LED
Status Condition
Off No Power. Plug in Power Adapter.
On Solid Power is ON. This is Conductor’s normal “waiting” mode.
Flashing Power is ON, but an error condition exists:
a. Didn’t pick up a disc
b. Dropped a disc
c. Discs out
d. Robotic arm stalled; probably hit something while moving. Press
any button on Control Panel to re-try.
B. Pause LED
Status Condition
Off Normal “waiting” mode
On Solid Conductor is paused.
Flashing Conductor is busy; i.e. motors are running, printer is printing, etc.