User`s manual

- 6 -
Make sure it is located at “Drive 1”. If not, then you need to
press the UP or DOWN navigation button to search for it.
c. Press “>>” to submit your selection.
2. Go back to “COPY” Menu.
a. Use UP or DOWN arrow button to navigate to the following
screen:
3. Start the Copy Process.
a. Now, please insert your master disc and your blank discs into
the corresponding tray(s) and press “>>” button to enter
COPY menu. You will see the duplicator mode menu like
below:
Now, you have been given two choices:
• Load and Copy
• On the Fly
For detail information, please review “Tutorial Guide XII:
Introduction to Duplication Mode.”
Once you have decided which mode you would like to run,
press UP or DOWN arrow button until your desired mode is
displayed and press “>>” button to confirm.
DUPLICATOR 1.00
1. COPY
Duplication Mode:
Load and Copy