User`s manual

- 11 -
Once the duplication run is completed, the successful copies
will be ejected and you shall see the following screen:
O
Next, refill more blank media to continue making more
copies, or you can press “<<” to terminate your project and
go back to the main menu.
If you’ve specified a counter value for your project and your
project is completed, you shall see the following screen:
If you see above message, you can press “>>” to go back to
main menu.
If you enabled the counter and the number of discs
you have inserted is more than what you requested,
you will receive a message regarding you have
inserted more discs than what you need. You can
continue to copy or you can eject the extras.
If you happen to have any failed discs (bad copy), the
failed disc(s) will not be ejected automatically. You
need to manually eject them and throw them away if
they are write once recordable disc(s).
21 Disc Copied
Press OK to Finish
PASS 7 FAIL 0( 7)
Waiting for Blanks
- “PASS 7” indicates that you’ve
just made 7 successful copies.
- “FAIL 0” indicates that you
have no failure in this run.
- “7” indicates that you’ve
successfully copied 7 copies so
far.