User`s manual

- 22 -
Once the number of blank discs you inserted matches
the number of discs detected on the screen. Then press
“>>” (if you are not using Auto Start or wish to speed
up the process) to confirm and the following
Processing screen will appear.
If the number of blank discs you inserted doesn’t
match the number of discs detected on the screen,
please give 10-15 seconds for the duplicator to
recognize all of your blank discs.
e. After 2 or 3 seconds of processing time, the following
Copy Progress Screen will appear.
Counter Specified No Counter
OR
It is normal to see the progress indicator stays at 0-
10% and 100% for approximately 30 seconds for CD
duplication and up to 1 minute for DVD duplication.
That is caused by the initializing and finalizing
stages.
Processing...
Please Wait
Copying ... H4012MB
0 12% 481MB
Copying ... H4012MB
0/21 12% 481MB
- “4012MB” indicates the
capacity of the master disc.
- “481MB” indicates the current
MB from the master disc that
has been copied.
- “12%” indicates the current
progress of the duplication.
- “0/21” indicates you have a
project size of 21 copies and
you have made 0 copies so far.
- “H” indicates you are copying
from a Hard Drive Image.
- “4012MB” indicates the
capacity of the master disc.
- “481MB” indicates the current
MB from the master disc that
has been copied.
- “12%” indicates the current
progress of the duplication.
- “0” indicates that you have
made 0 copies so far.
- “H” indicates you are copying
from a Hard Drive Image.