User`s manual

- 31 -

To load your master disc onto a hard drive partition, please do the

following:

1. Make sure the Master Reading Source is set to the Hard

Drive.

It is very important to make sure the Master Reading Source is

set for the Hard Drive in order to avoid unnecessary error

messages. To check the Master Reading Source, please do the

following:

a. Use UP or DOWN arrow button to navigate to the

following screen.

b. Press “>>” to enter Select Source Menu and you shall

see the following:

Make sure it is located at “Hard Drive”. If not, then

you need to press UP or DOWN navigation button to

search for it.

c. Press “>>” to submit your selection. After your

selection has been submitted, you will see the

following:

DUPLICATOR 1.00

8. Select Source

Hard Drive Port 0

WDC WD400EB-75CPF0

DUPLICATOR 1.00

8. Select Source