User`s manual

- 41 -
Tutorial Guide
VIII. Change the SETUP settings
Most of the internal settings and information is stored inside the
SETUP menu. To explore and modify them is simple. Below is
an example to modify the “Auto Start” setting. Please note that
the default setup is set for optimal performance of the
duplicator, it is unnecessary to change if you are satisfied with
the outcome.
1. Use UP or DOWN arrow button to navigate to the
following screen.
2. Press “>>” to enter Setup Menu and you shall see the
following:
3. Use UP or DOWN arrow button to navigate to the
following screen.
4. Press “>>” to enter Auto Start Setting Menu and you
shall see the following:
DUPLICATOR 1.00
12.Setup
Setup
1.Langua
Setup
2.Auto Start