User`s manual

- 65 -
Menu Overview:
1. COPY
This menu will guide you to make CD/DVD/BD copies. Before
you enter this menu to copy, please make sure you have
selected the correct Master Reading Source. For more
information, please refer to “Tutorial Guide I – Make Disc-to-
Disc Copies” or “Tutorial Guide II – Make Hard
Drive(HDD)-to-Disc Copies”
2. TEST
This menu will guide you to make simulation of copying
process. During this simulation process, all write once
recordable discs such as (DVD-R, CD-R) will be reusable. The
purpose of performing such simulation is to ensure error free
duplication.
Due to the physical limitation of DVD+R/RW & BD-
R/RE recordable format, you can not perform this
procedure if your recordable discs are DVD+R/RW &
BD-R/RE recordable format. If you do so, you will
encounter failure messages.
If you are using CD-RW/DVD-RW discs as your
blanks media during the simulation, all of the content
inside those discs will be ereased permanently.
3. COMPARE
This menu will guide you to perform a bit-by-bit comparison
between the Master Reading Source and all the copied discs
inside the writer tray. The purpose to perform this compare
operation is to ensure all of your copies have the exactly same
information as your Master Reading Source.