User`s manual

- 72 -
13.6 Update Firmware
This function will update the software of your duplicator.
To update, you need to insert manufacture Certified Update
CD into the Reader and select this function by pressing
“>>” button. We strongly suggest you to not upgrade your
duplicator’s firmware unless your duplicator is getting
unstable.
13.7 Save
This function will save all the settings you’ve modified
since last time the system is booted.
14. Account Management
This feature allows you, the administrator, to have the power to:
1. Create user accounts and passwords to prevent unauthorized
use of this duplicator.
2. View existing user account lists
3. Edit existing user account information, including name and
password.
4. Delete existing user account(s).
5. Enable/Disable this feature.
For more information, please refer to “Tutorial Guide X –
Introduction to Account Management Feature.”
15. AUTOCOPY
This function will allow the system to operate under the
“AutoCopy” mode for ease of operation. For more information
on the AutoCopy feature, please refer to “Tutorial Guide XII –
Using AUTOCOPY.”
16. Shutdown
This function will make sure it is safe to turn off your
duplicator. Once you see “Ready to Power OFF” message, then
you can safely turn off the machine via Power Switch. Turning
off your duplicator without perform this function will increase
the risk of damaging your duplicator.