Instructions / Assembly

STEP 1-
Unpack “The-DeckMATE” and contents and make sure
all components are accounted for. We highly recommend
assembling and installing “The -DeckMate” completely
on your rail WITHOUT THE TEMPERED GLASS
SHEET FIRST to familiarize yourself with the
installation process without the hindrance of the heavy
tempered glass sheet.
STEP 3-
FIG. 2
STEP 2-
Attach loop end of rail strap assemblies to “The-
DeckMATE” frame. Pay careful attention that the strap is
fully engaged over the security tooth. SEE FIGURE 2
Assemble the 2 piece telescoping support arm by inserting smaller bottom section with snap button into the
larger top section with adjustment holes. SEE FIGURE 3 (BELOW)
Depress snap button while simultaneously sliding the smaller bottom section into the larger top section until
desired adjustment is reached. Be sure the snap button clicks into place. SEE FIGURE 3A (BELOW)
Attach telescoping arm assembly to frame using 1 detent pin before placing frame assembly onto rail. SEE
FIGURES 3B AND 3C (BELOW)
FIG. 3 FIG. 3A
STEP 4-
FIG. 3B FIG. 3C
Attach “The-DeckMATE” frame to the railing by wrapping the strap assembly under the railing
and coming up and over the railing from the other side. SEE FIGURE 4 (NEXT PAGE)
Then secure with detent pin. SEE FIGURE 4A (NEXT PAGE)