Operation Manual

12 PRIMETECH ENGINEERING
12/43
3.2. Rear panel
① DC in / GPIO terminal (15 pin connector)
The connector model and pin assignment are shown below.
Connector model
Model Maker
Camera side D02-M15STF-21L9E JAE
Pin assignment
Pin number
Signals Pin number Signals
1
DC+12V-IN、DC jack
9 GND_GPIO_OUT
2 DC+12V-IN 10 DC+12V-OUT
3 GPIO_IN1 11 GPIO_OUT1
4 GPIO_IN2 12 GPIO_OUT2
5 GPIO_IN3 13 GPIO_OUT3
6
GND_PWR、DC jack
14 GPIO_OUT4
7 GND_PWR 15 GPOI_OUT5
8 GND_GPIO_IN
－ －
② LAN port
The pin assignments are shown below.
Pin assignment
Pin number Signals
1 DA+
2 DA-
3 DB+
4 DC+
5 DC-
6 DB-
7 DD+
8 DD-
①
DC in / GPIO terminal
(D-sub 15 pin connector: socket)
②
LAN port
(RJ45 connector: jack)
LED (orange)
Lights up while sending and receiving data
LED (Green)
Lights when connected normally