Operation Manual

13 PRIMETECH ENGINEERING
13/43
3.3. Cable connection
Connect the attached camera cable to the DC in / GPIO terminal and the LAN cable to the LAN port.
When connecting a LAN cable with fixing screws, turn the connector fixing screws on the left and right of the connector
firmly to fix it. For the other connector of each cable, connect the attached AC adapter to the DC jack of the camera cable,
and connect the LAN cable to the network card of the host device.
3.4. FAN
The PXG130SP and PXG030SP have a FAN for cooling inside.
This FAN is always running while it is powered on.
The hole of the middle body of the camera module serves as an air passage for this air cooling, so be careful not to block
all the holes.